NE4QG/EX (TLS-224P GB) Mon.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 PRECAUTIONS CAUTION: Do not put your hand or other objects in the cassette loading slot because of risk of injury or accident. Be sure to keep small children away from the VCR. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 FEATURES CONTENTS • Clog detection • High-speed Fast forward/Rewind • Field recording/playback • 3, 12, 24-hour mode recording audio playback • Autorepeat recording • Alarm recording function • On-screen mode setting • Integrated time date generator • Alarm scan function • Forward field advance function • 30-day memory backup • Security lock • Recording check function • Head-cleaning function PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 LOCATIONS OF CONTROLS AND INDICATORS Front Panel 1 2 3 4 5 6 7 89F STANDBY/ON REPEAT PAUSE/ SCAN PLAY REW (REC CHECK) FF MENU RESET STOP REC EJECT SCREEN STANDBY/ON ON ON OFF GB AUDIO ON TRACKING V.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 LOCATIONS OF CONTROLS AND INDICATORS 8 Operation Indicators Digital Display 1 2 3 AL ER P 4 M 5 • They display the actual operation mode.
NE4QG/EX (TLS-224P GB) Mon.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 CONNECTIONS Connect the video camera and monitor TV as shown in the figure below. NOTE: Before making the connections, make sure all the devices are disconnected from the DC power supply.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 TYPES OF ON-SCREEN DISPLAYS AND DISPLAY SEQUENCE NOTES: • When a menu is displayed, recording will not be possible. • Press the PAUSE/SCAN or AUDIO ON/MENU button, the setting procedure is now completed. • During recording or playback the menus cannot be displayed. • To reset the settings of a menu to their original values, select the desired menu then press the MENU RESET button. The (USED TIME) menu data cannot be reset.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 SETTING THE LANGUAGE AND CLOCK 8 Following the same procedure as above (steps 4 Language Setting to 6), set when the time is changed back from summer time to standard time. English, French or German can be selected by the user. 1 Turn the power on to all devices used. 2 Press the AUDIO ON/MENU button to display the 9 Press the ] button. F Press the l (or j) button to set the day (ex: 15), (SET UP 1) menu. then press the « button.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 CHANGING THE ON-SCREEN DISPLAY Selecting the On-screen Display Changing the Date/Time Display Position You can select to display or not the date, time, the number of alarm triggers and tape speed. 1 Turn the power on to all devices used. 2 Set the ON SCREEN switch to the “ON” position. 1 Turn the power on to all devices used. 2 Press the AUDIO ON/MENU button until the (SET ° The date and time are displayed. UP 2) menu is displayed.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 VIDEO CASSETTE TAPES Use only video cassette tapes bearing the w logo. This VCR was primarily designed for use with E-180 cassette tapes, it is recommended to use E-180 VHS video cassette tapes for optimal performance. Unloading Handling Cassette Tapes NOTES: 1 In STOP mode, press the EJECT button. ° The cassette is automatically ejected.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 NORMAL RECORDING [Recording Speed] Normal Recording Maximum recording Recording Recording Audio duration (with an E-180 Tape motion speed interval recording cassette tape) Standard 3 3 hours 1/50 second mode Possible Continuous 12 Time lapse 15 0.1 24 mode 27 0.18 1 Turn the power on to all devices used. 2 Load a cassette tape with erasure-prevention tab. NOTE: • If in the (SET UP 3) menu, TAPE IN MODE is set to “REC”, recording will start.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 NORMAL RECORDING Recording Check Clog Detection The image being recorded can be checked. This VCR is equipped with a clog detection function. 1 During recording, press the PLAY (REC CHECK) The recording quality is monitored automatically. When the heads are dirty and the recording quality deteriorates, the output at the WARNING OUT terminal becomes 0V (Low), the “a” indicator flashes on the digital display, and the buzzer sounds. button.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 AUTOREPEAT RECORDING Autorepeat Recording Setting the Mode at the End of the Tape The same tape can be recorded over many times. In the (SET UP 3) menu, you can set the mode of the VCR mode when the tape reaches the end during recording. 1 Press the AUDIO ON/MENU button until the (SET UP 3) menu is displayed. 1 Press the AUDIO ON/MENU button until the (SET ° The “ALARM MODE” setting is flashing. UP 3) menu is displayed.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 ALARM RECORDING 5 Press the l (or j) button, to select the desired By connecting the ALARM IN terminal to a door switch, an interphone, etc., a recording can be done only when necessary. alarm recording duration (20S, 40S, 1M, 2M, 3M, 5M, CC or TRIG). Alarm Recording Setting 20S-5M. . Recording only for the displayed duration Alarm recording is performed when there is an input (trigger) at the ALARM IN terminal, “AL” is displayed on the digital display. CC . .
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 ALARM RECORDING Alarm Recording Counter Display Checking the Alarm Recordings Time • During alarm recording, “AL” will be flashing on the 1 Press the AUDIO ON/MENU button until the • digital display. (ALARM TIME) menu is displayed. If the ON SCREEN switch is set to the “ON” position, the number of alarms will flash on the monitor screen. number of alarm triggers, and the 8 most ° The recent alarm recording times are displayed.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 ALARM RECORDING Alarm Scan To look for an alarm recording by viewing the first 5 seconds of each alarm recording. 1 Press the PAUSE/SCAN button during stop mode. ° “AL SCAN” will be displayed on screen. 2 Press the FF (or REW) button. unit will advance (or rewind) the tape at ° The high speed and playback the first 5 seconds of every alarm recording. cancel the alarm scan mode, press the ° To STOP button.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 PROGRAMME TIMER RECORDING 9 Press the l (or j) button to set the recording stop There are two programme timer recording methods, daily recording or recording on certain days of the week. minutes (ex: 00), then press the « button. Example 1: To record on every Saturday from “SPD” (recording speed) position will start ° The flashing. 9:00 AM to 5:00 PM (17:00), in 24-hour mode (recording speed).
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 PROGRAMME TIMER RECORDING Setting the Holidays Changing a Programme Timer Recording By setting the holidays, timer recording will be conducted on those days, as set for Sundays. 1 Press the AUDIO ON/MENU button until the 1 Press the AUDIO ON/MENU button until the (TIMER SET) menu is display. (HOLIDAY SET) menu is displayed. 2 Press the « (or ]) button, until the setting to correct is flashing.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 PROGRAMME TIMER RECORDING NOTES: • During timer recording or timer recording stand-by, all the buttons on the VCR, except the TIMER button, are disabled. • If the power fails, the recording will be interrupted. When the power is restored, the recording will resume if the stop time has not yet been reached, and “P” will be displayed on the digital display.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 RECORDING USING AN EXTERNAL TIMER INPUT 5 Follow steps H and I under “PROGRAMME Recording can be controlled by an external start/stop signal input at the EXT TIMER IN terminal. TIMER RECORDING” on page 17. an external signal is input, “E” will light ° When on the digital display and recording will take Example 2: To record using the signal input at the EXT TIMER IN terminal, in 12-hour mode. place.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 NORMAL PLAYBACK Normal Playback Tracking Control 1 Turn on the power to the VCR and TV monitor. 2 Load the video cassette tape. 3 Press the REC/PLAY SPEED button to select the If there is noise in the image during playback, 1 While looking at the playback picture, press and hold the TRACKING/V. STILL+ button to minimize the noise. playback speed. 2 If it cannot be minimized, press the TRACKING/V.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 SPECIAL PLAYBACK Picture Search Frame Advance 1 Press the FF (or REW) button, during normal 1 Press the FF button, during still image mode. playback. ° still image is advanced of one image ° The (field). The image can be seen while the tape is advanced (or rewound) at high speed. 2 To return to normal playback, press the PLAY 2 To return to normal playback, press the PLAY button. button.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 SETTING THE SECURITY LOCK The security lock function is designed to prevent accidental stopping of recording if the STOP button is pressed inadvertenly. NOTES: • While the security lock is engaged all commands, except the one to cancel the security lock, are disabled. 1 While holding the TRACKING/V.STILL + button, • The security lock cannot be engaged while a menu is press the REC/PLAY SPEED button. ° displayed. “ö” is displayed on the digital display.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 CHECKING USAGE DURATION 1 Press the AUDIO ON/MENU button until the (USED Example TIME) menu is displayed. (USED TIME) . . . . . . . öSW OUT FIELD 01 TIMING FIELD 3H Y The video heads usage duration and the power on duration are displayed. VIDEO 00003H POWER 00007H 2 Press the PAUSE/SCAN button, the normal screen is displayed. NOTE: • The (USED TIME) data cannot be reset.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 OUTPUT TERMINALS TAPE END OUT Terminal WARNING OUT Terminal • During recording, when the end of the tape is • If the tape stops or other problem, the output • reached or when the tape counter reading indicates 2 hours 57 minutes or more, the output becomes 0V (Low). becomes 0V (Low). • To reset the output, unplug the power cord then plug it back in or press the ALL RESET button.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 OUTPUT TERMINALS SW OUT Terminal REMOTE Jack • You can use a VA-RMN01 Remote Control Unit (sold When recording, a pulse signal is output at the SW OUT terminal. separately) to control remotely the VCR. • Remote control of the VCR is possible by connecting This terminal is usually connected to the switch input (SW IN) of devices like a camera switcher unit, or a quad compressor. a remote controller with a circuit such as indicated below, to the REMOTE jack.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 MAINTENANCE Daily Inspection Periodic Inspection The following daily inspections are recommended in order to assure long-term and trouble-free operation of the unit. Periodic inspection and maintenance should be referred to your dealer. The daily inspections are particularly important if using autorepeat recording.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 TROUBLESHOOTING GUIDE If the unit does not operate normally when you follow the instructions indicated in the manual, please refer to the table below.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 SPECIFICATIONS General Specifications Recording method Audio recording Tape speed Specified video cassette tape Recording/playback time Fast forward/rewind time Standard Dual-azimuth 2-head rotating helical scanning system In 3-, 12-, and 24-hour modes 23.
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998 SANYO Electric Co., Ltd. 1AC6P1P1668– –A NE4QG/EX (0598KP-SY01) Issue No. 1 Copyright SANYO, 1998 All rights reserved.