L72K2/US2 GB 1998, 2, 24 INSTRUCTION MANUAL VCB-3512T B/W CCD Camera About this manual • Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
L72K2/US2 GB 1998, 2, 24 SANYO INDUSTRIAL VIDEO B/W VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in this warranty.
L72K2/US2 GB 1998, 2, 24 Depending on the conditions of use, installation and environment, please be sure to make the appropriate settings and adjustments. If you need help with installation and/or settings, please consult your dealer. CONTENTS INFORMATION TO USER ..................................2 PRECAUTIONS...................................................3 PARTS NAMES...................................................4 MOUNTING THE LENS ......................................6 POWER SOURCE...........
L72K2/US2 GB 1998, 2, 24 INFORMATION TO USER Safety Guard THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT. WARNING: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. For the customers in Canada This Class B digital apparatus complies with Canadian ICES-003. Pour la clientèle canadienne Cet appareil numerique de la Classe B est conforme a la norme NMB-003 du Canada.
L72K2/US2 GB 1998, 2, 24 PRECAUTIONS In case of problem Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit. For internal settings and repairs, consult your dealer (or a Sanyo Authorized Service Centre).
L72K2/US2 GB 1998, 2, 24 PARTS NAMES 1 Video output connector (VIDEO OUT: BNC type) 4 1 3 Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector. 2 12 V DC input terminal (12 V DC, GND) 3 External sync composite video signal input connector 2 (VS IN: BNC type) Connect to this connector the synchronizing signal output from a synchronizing signal device or the composite signal of a video distributor. 4 Power indicator (POWER) Comes on when the power to the camera is on.
L72K2/US2 GB 1998, 2, 24 PARTS NAMES 8 Lens iris output connector (4 pin) This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens. 8 1 3 2 4 9 9 Camera setup section (under the cover) This unit factory settings are as indicated below. These settings are for when using a 1/2 inch CS mount DC (without EE internal amplifier) type lens.
L72K2/US2 GB 1998, 2, 24 F Flange-back adjustment screw (FLANGE BACK ADJ.) FG 1 G Flange-back lock screw (FLANGE BACK LOCK) Flange-back adjustment 2 ADJ. 1 LOCK 3 If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the flange-back position as described below. 1 Using a + screwdriver, loosen the FLANGE BACK LOCK screw (M2:+).
L72K2/US2 GB 1998, 2, 24 MOUNTING THE LENS Installation of a VIDEO type auto-iris lens (sold separately) 2 (A) (B) A 1/2 or 2/3 inch C mount type lens with EE amplifier circuit that uses the video signal and a DC power source. 1 2 3 1 Connect the lens plug to the LENS connector on the side of the camera. If the lens plug shape or wiring does not correspond to the specifications below, connect the supplied plug as indicated.
L72K2/US2 GB 1998, 2, 24 Compatible auto-iris lenses 1/2 inch Sanyo DC type lens VCL-CS12GY: Standard angle, f= 12 mm VCL-CS6GY: Wide angle, f= 6 mm VCL-CS3GY: Ultra-wide angle, f= 3.7 mm 1/2 or 2/3 inch VIDEO type lens Standard angle, f= 9 mm Telephoto angle, f= 12 mm More telephoto angle, f= 16 mm If using a VIDEO type auto-iris lens • Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned all the way to Av (Average).
L72K2/US2 GB 1998, 2, 24 CONNECTIONS (A) 1 Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately. 2 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 Insert the plug of this power cord into a wall outlet. The POWER indicator (A) will light. Adjust the picture on the monitor using the Brightness and Contrast controls.
L72K2/US2 GB 1998, 2, 24 SETTINGS VR401 L E V E EI ON 1 2 E. S. 3 ON OFF ON BLC L H L DC VIDEO A. I. LENS Electronic iris function setting EI Use a manual or fixed iris lens and set the lens aperture to the shortest F stop. Set the EI/BLC switch to EI-ON position. ON OFF ON Note: Please refer to the specifications for dynamic range of the electronic iris. BLC CAUTION: • The electronic iris is suitable for normal indoor use.
L72K2/US2 GB 1998, 2, 24 Backlight compensation setting EI Use an auto-iris lens and set the EI/BLC switch to the BLC-ON position, to engage the backlight compensation function. Use an auto-iris lens. Set the EI/BLC switch to BLC-ON switch to the ON position. ON OFF ON BLC Note: The backlight compensation will check the light at the centre of the screen. If using a VIDEO type auto-iris lens • The ALC volume on the lens should be turned all the way to Av (Average).
L72K2/US2 GB 1998, 2, 24 TROUBLESHOOTING Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not perform correctly, please consult your dealer or a Sanyo Authorized Service Centre.
L72K2/US2 GB 1998, 2, 24 SPECIFICATIONS Scanning system : Interlace : Image device : Picture elements : Effective picture elements : Synchronizing system : External sync: : Resolution : Video output level : Video S/N ratio : Minimum required illumination : (incandescent lighting) Backlight compensation : Electronic shutter : Electronic iris function : Electronic iris range : Flange-back : Gamma correction : Lens mount : Environmental conditions : Power supply : Power requirement : Weight : EIA standard (5