User Manual

SPECIFICATIONS
Scanning system : EIA standard (525 TV lines, 30 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/2 inch solid state image device CCD
Picture elements : 811 (H) x 508 (V)
Effective picture elements : 768 (H) x 494 (V)
Synchronizing system : Internal sync/External sync (Automatic switching)
External sync: : VS (composite video signal), 1.0 Vp-p / 75 ohms (to switch from
75 ohms to Hi impedance, remove the internal jumper chip)
Resolution : 570 TV lines horizontally, 350 TV lines vertically
Video output level : 1.0 Vp-p/75 ohms, composite
Video S/N ratio : More than 50 dB
Minimum required illumination
(incandescent lighting)
: Approx. 0.07 lux with a F 1.2 lens,
approx. 0.09 lux with a F 1.4 lens
Backlight compensation : Manual ON/OFF switching, center zone light measuring system
(Active when using an auto-iris lens)
Electronic shutter : 8 speeds, selectable by switches:
(1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000 sec.)
Electronic iris function : Manual ON/OFF switching
Electronic iris range : 0.07 lux to 18,000 (F 1.2, lens)
0.09 lux to 24,000 (F 1.4, lens)
0.36 lux to 100,000 (F 2.8, lens)
Flange-back : 12.5 mm ± 0.8 mm
Gamma correction : γ = 0.45
Lens mount : CS mount (or C mount with the supplied adaptor)
Environmental conditions : Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no condensation)
Power supply : 12 V DC ± 10 %
Power requirement : 12 V DC/150 mA (without auto iris lens)
Weight : Approx. 330 g (without lens)
Dimensions
Features and specifications are subject to change without prior notice or obligations.
VIDEO OUT
POWER
VS IN
SEE INSTRUCTION MANUAL
NC
+–
12
22
11
1.5
108.5
99.5
1/4”–20 UNC
56
45
28
12V DC
L72K2/US2 GB 1998, 2, 24
English 13