User's Manual

6
❶❷ ❸ ❹ ❺
ONSCREEN DISPLAY (OSD)
SETTING THE ONSCREEN DISPLAY
Some of these functions will be displayed every time the
VCR is operated.
The SETUP, clock setting, and timer recordings are
accessed conveniently with Onscreen Menu Displays that
lead you through each step. The following pages describe
the Onscreen selections to be set.
MENU SELECTION
Your VCR allows remote control adjustment of several
features.
1 Press MENU and the MAIN menu will appear.
2 Select the desired menu with the v or V button and then
press ENTER.
• The function displays can be seen on the TV screen for 5 sec-
onds.
• The clock (or tape counter or tape remaining) mode will contin-
ue until you press ENTER.
• The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. The remaining tape
length indicator appears after any tape operation.
NOTES
CLOCK (page 8)
PROGRAM (page 11)
TUNING (page 7)
SETUP (page 7)
PLAY HI-FI CH 4
SP STEREO
TVG
OCT 8 , FRI 2:15 PM
❶ TAPE SPEED DISPLAY
Shows the current tape speed.
❷ FUNCTION DISPLAY
Indicates the function in progress.
❸ HI-FI DISPLAY
Indicates when this unit is playing back a tape recorded in HI-FI.
❹ CHANNEL DISPLAY
I ndicates the selected channel (or LINE1, LINE2).
❺ STEREO/SAP DISPLAY (MONO is not displayed.)
Shows the type of audio signal received by the VCR tuner.
❻ DATE DISPLAY
Shows the current date (Month/Day/Day of the week format).
❼ CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter, and remaining time
of the tape.
❽ TVG DISPLAY
Shows TVG function is active.
Each press of ENTER changes the TV screen in the fol-
lowing sequence:
❻❼
REM 1:58
0:35:40
2:15 PM
STOP CH 4
SP STEREO
TVG
OCT 8 , FRI 2:15 PM
MAIN MENU
• These menus can be displayed for 3 minutes.
NOTE
EASY INFORMATION
If Extended Data Service (XDS) signals are provided
along with normal TV signals in your area or during play-
back of a tape recorded with Extended Data Service
(XDS) signals, the station ID, program title, and program
details are shown on the TV screen.
When viewing a channel with Extended Data Service
(XDS) signals, press ENTER and the station ID will
appear on the TV screen. Press ENTER again and the
program details will appear on the TV screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press ENTER twice and the
program title and program details will appear on the TV
screen.
PROGRAM DETAILS
LENGTH: Indicates the total time of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program (N/A,
G, PG, PG-13, R, NC-17, X, or Not Rated). The rating
N/A means that the motion picture ratings are not
applicable to this program.
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
CH 4
SP WABC STEREO
TVG
“Home video”
OCT 8 , FRI 2:15 PM
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
❽