Operation Manual

3A. Sprint Service: The Basics 93
Sprint Service
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the
seven-digit number and press .
2. Read the message and press .
To answer incoming roaming calls with Call Guard on:
1. Press .
2. Read the message and press .
Data Roam Guard
Depending on service availability and roaming
agreements, your phone may be able to access data
services while roaming on certain other networks. You
can set your phone to alert you when you are roaming
off the Nationwide Sprint Network and try to use data
services such as messaging.
To set your Data Roam Guard notification:
1. Press > Settings > Others > Roaming > 
Data Roam Guard.
2. Select On or Off.
䡲 On (default mode) turns your phone’s Data Roam
Guard feature on. You will see a prompt that will
require you to respond anytime you access data
services while roaming.
䡲 Off turns your phone’s Data Roam Guard feature
off. Your phone will not notify you of your roaming
status when you access data services.
To use data services when Data Roam Guard is active:
䊳 When a notification appears informing you that
data roam charges may apply, press
ROAM (left
softkey) to connect.
Note: Call Guard is turned on by default on your phone.
Voice dialing and speed dialing are not available when
you are roaming with Call Guard enabled.
Note: If the Call Guard feature is set to On, you need to take
extra steps to make and receive roaming calls.