Operation Manual

2A. Phone Basics 13
Phone Basics
Turning Your Phone On and Off
Turning Your Phone On
䊳 Press .
Once your phone is on and finds a signal, it
automatically enters standby mode – the phone’s idle
state. At this point, you are ready to begin making and
receiving calls.
If your phone is unable to find a signal after five
minutes of searching, a Power Save feature is
automatically activated. When a signal is found, your
phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also
initiate a search for Sprint service by pressing any key
except numbered keys.
Turning Your Phone Off
䊳 Press and hold for two seconds until you see
the powering-down animation on the display
screen.
Your screen remains blank while your phone is off
unless the battery is charging.
Battery and Charger
Sprint-approved or Kyocera-approved batteries and
accessories can be found at Sprint Stores or through
Kyocera; or call 1-866-866-7509 to order. They’re also
available at
www.sprint.com.
Tip: The Power Save feature conserves your battery power
when you are in an area where there is no signal.
WARNING: Use only Sprint-approved or Kyocera-approved
batteries and chargers with your phone. The
failure to use a Sprint-approved or Kyocera-
approved battery and charger may increase the
risk that your phone will overheat, catch fire, or
explode, resulting in serious bodily injury, death,
or property damage.