Operation Manual

2F. Voice Services 65
Voice Services
Checking Phone Status Using ASR
You can use ASR to obtain information about your phone:
䢇 Status (all of the following except My Phone Number)
䢇 Time
䢇 Signal Strength
䢇 Network
䢇 Battery
䢇 My Phone Number
1. Press and hold or .
2. When you hear “Say a command,” say “Check.”
3. When you hear “Which status item?,” say a command.
ASR Settings
To change ASR confirmation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Confirmation.
3. Highlight an option and press .
䡲 Automatic to ask for confirmation only when the
system is not sure what you said.
䡲 Always Confirm to always ask for confirmation.
䡲 Never Confirm to never ask for confirmation.
To adapt the system to your voice:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation > 
Adapt Voice.
3. Press START (left softkey) and repeat each word,
phrase, or telephone number you hear.
To reset the adaptation:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Adaptation > 
Reset Voice > YES (left softkey).
To change the ASR mode:
1. Press and hold or .
2. Press SETTINGS (right softkey) > Audio Modes.
3. Highlight an option and press .
䡲 Expert Mode to sound a beep only.
䡲 Prompt Mode to prompt for required information.
䡲 Readout Mode to prompt for required information
and to read the text displayed on the main screen.