Operation Manual
74 2G . Ca m e r a
䡲 NEW ADDRESS (right softkey) to enter a recipient’s
wireless phone number or email address directly.
Press
CONTINUE (left softkey) to proceed.
4. Compose a message.
5. Confirm the recipients, message, and pictures.
(You may also select additional options by
pressing the right softkey. Follow the onscreen
instructions to add available options.)
6. Press SEND (left softkey) to send the pictures.
Printing Pictures From Your Phone
Your phone is PictBridge compatible, allowing you to print
directly from your phone without connecting to a
computer. You can also print your pictures using Bluetooth
(see “Printing Pictures via Bluetooth” on page 80).
To print pictures directly from your phone:
1. Press > Photos > My Photos.
2. Highlight a picture to print and press OPTIONS
(right softkey)
> Print > PictBridge.
䡲 Press OPTIONS (right softkey) > Select Multiple to
select multiple pictures.
3. Connect your phone to the PictBridge-enabled
printer using a compatible USB cable. When the
printer has connected, press
CONTINUE (left
softkey) in the picture thumbnail screen.
4. To set the print settings, highlight each element and
select a setting using your navigation key right or left.
䡲 Type: You can select the print mode from
Default Printer, Standard Print, or Index Print.
䡲 Copies: You can set the number of copies from
Single, Doubles, or Manual. When you select
Manual, set the number (up to 10 per picture) by
pressing your navigation key right or left. The number
of copies will be displayed in the field below.
䡲 Size: You can set the print size from
Default Printer, 4"x6", 5"x7", 8"x10", or Letter.
(Print sizes may vary according to the type of
printer you have.)
䡲 Date: You can imprint the date on your pictures.
Select
On or Off. (Date stamping may not be
available depending on the type of printer you have.)
Note: Make sure your battery is fully charged before printing
your pictures.
Note: You may not be able to print pictures that you cannot
display on your phone.