Operation Manual

EN-53
4. After Print Setting is set, the print icon is marked on the displayed
image. You can still use the four-way controller (WX) to change the
image by your preference, then press the button to print.
5. Use the four-way controller (ST) to access the paper selection
setting, then press the button to confirm.
[Size]: You may select the desired item depending on the type of
printer being used.
[Borderless]: You may select the desired item depending on the type of
printer being used.
6. This starts printing and displays the message “Transferring” on the
LCD monitor screen.The message will disappear after the printing is
finished. Then the screen returns to [Printing Mode Select].
 To cancel printing:
Pressing the button during print data transfer displays the screen
for selecting whether to [Continue] or [Cancel] printing.
100-0008
100-0008
100-0008
Set :Cancel :
Print :Select :
MENU
Standa
Standard
Standa
Standard
Print
Print Pa
pe
per
OK :
OK :
OK :
Si
Size
Bo
Bor
de
der
les
less
Standard
Standard
Print Paper
Size
Borderless
T
otal
otal 3
Total 3
Cancel : MENU
Cancel : MENU
Cancel : MENU
Cancel :
Cancel :
Cancel :
1/3
1 / 3
T r
ans
a n s f e r
rin
r i n g
1/3
Transferring
Print
Print
OK :
OK :
OK :
Continue
Continue
Cancel
Cancel
Continue
Cancel
Print