Instruction Manual

Getting Started 21

Taking your First Photo

English

Using the AEB (Auto Exposure Bracketing) Function

When using the AEB (Auto Exposure Bracketing) function, the camera auto-

matically takes 3 consecutive photos with different exposures by pressing the

Shutter button once. For example, when the current EV compensation value is

+0.3 EV and the AEB bracket interval value is set to ±0.3, the camera takes shots

of the same scene with 3 varying levels of exposure: 0 EV, +0.3 EV, and -0.3 EV.

This function is only available in Auto, P-Mode, Av and Tv modes. To set the AEB

mode:

1. Press the MENU button to display menu

options.

2. Press the Left/Right navigation buttons to

select AEB setting and press the OK button.

3. Press the Up/Down navigation buttons to

select from the available options:

• AEB: Select to enable (ON) or disable (OFF)

the AEB function.

• BRACKET: Select to set the bracket interval

value ranging from ±0.3 to ±2.0 EV in 0.3 or 0.4 EV increments.

• EXIT: Select to apply new settings to the camera and return to the setup

menu.

Note:

1. When taking AEB shots, hold the camera steadily. For the best result, use the tripod.

2. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.

AEB

BRACKET

EXIT

0.3EV