Instruction Manual

EN-31
Setting Focus
Images can be captured with the focus determined automatically using auto focus. You may over-ride the
auto focus and specify [ ] macro or [ ] infinity.
1. Rotate the mode dial to , , , , , or .
2. Press the power switch to turn on the power.
3. Press the four-way controller (X/ ). The focus mode
changes each time the button is pressed. You can also
change the setting using four-way controller (ST).
4. Press the button to confirm the setting.
5. Compose your scene and press the shutter release button.
The camera has three focus modes: Standard, Macro and Infinity.
The table below will help you choose the appropriate focus mode:
Focus mode Description
Standard Select Standard-focus setting for most occasions when you want the camera to
automatically determine the focus setting.When using Standard-focus setting, any
object at a focus range of 40 cm (15.7") or greater can be in focus.
Macro Select Macro-focus setting to capture close-up images. When the lens is zoomed to
its widest position you may focus objects as close as 6 cm (2.4"). When the lens is
zoomed to its telephoto position (3x zoom) you may focus objects as close as 35 cm
(13.8").
Infinity Select Infinity-focus setting when you want to capture images of subject at a
distance of infinity. The flash mode will be set to Flash Off automatically.
F
ocu
ocus
Standa
Standard
OK :
OK :
Focus
Standard
OK :