FCC STATEMENT (For customers in USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
READ THIS FIRST Trademark Information Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation. Pentium® is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Computer, Inc. SD™ is a trademark. Photo Explorer and Photo Express are trademarks. Other names and products may be trademarks or registered trademarks of their respective owners. Product Information Product design and specifications are subject to change without notice.
SAFETY INSTRUCTIONS Read and understand all Warnings and Cautions before using this product. Warnings If foreign objects or water have entered the camera, turn the power OFF and remove the batteries. Continued use in this state might cause fire or electric shock. Consult the store of purchase. If the camera has fallen or its case has been damaged, turn the power OFF and remove the batteries. Continued use in this state might cause fire or electric shock. Consult the store of purchase.
Cautions Insert the batteries paying careful attention to the polarity (+ or –) of the terminals. Inserting the batteries with its polarities inverted might cause fire and injury, or damage to the surrounding areas due to the battery rupturing or leaking. Do not fire the flash close to anyone’s eyes. This might cause damage to the person’s eyesight. Do not subject the LCD monitor to impact. This might damage the glass on the screen or cause the internal fluid to leak.
Warning: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE FOR AMERICAN USERS The following advisory is included in accordance with the laws of the State of California (USA): WARNING: This product contains chemicals, including lead, known to the States of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling.
FOR CANADIAN USERS This Class B digital apparatus complies with Canadian ICES-003 FOR EU USERS Note: This symbol mark and recycle system apply to EU countries and do not apply to countries in other areas of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.
FCC Information Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Declaration of Conformity Model number: VPC-S500 Trade Name: SANYO Responsible party: SANYO FISHER COMPANY Address: 21605 Plummer Street, Chatsworth, California 91311 Telephone No.: (818) 998-7322 This device complies with Part 15 of the FCC Rules.
Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Different battery types and surrounding temperatures may affect the battery performance. Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce camera performance. This low temperature will also influence Alkaline battery performance, therefore Ni-MH rechargeable battery is highly recommended.
CONTENTS INTRODUCTION ..............................................................................................11 Package Contents .....................................................................................................12 GETTING TO KNOW YOUR CAMERA ...........................................................13 Front View .................................................................................................................13 Rear View ............................................
MOVIE MODE ..................................................................................................40 Recording Movie Clips ..............................................................................................40 Playing Back Movie Clips ..........................................................................................41 PLAYBACK MODE - ADVANCED FEATURES ..............................................42 Deleting Images/Movie Clips ...................................................
INTRODUCTION Thank you for purchasing the new digital still camera! Equipped with a 5.0 Megapixels CCD sensor, your camera delivers high quality, 2560 x 1920 resolution images. Other features provided by the camera include the following: 5.0 Megapixels A high-resolution CCD sensor provides 5.0 megapixels for high quality of images. Auto flash An auto flash sensor automatically detects the shooting (lighting) conditions and determines whether the flash should be used. 2.
Package Contents Carefully unpack your kit box and ensure that you have the following items. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer. Common Product Components: Digital Camera User’s Quick Guide Software CD-ROM (Instruction Manual Included) Camera Strap USB Cable Batteries • Accessories and components may vary by retailer.
GETTING TO KNOW YOUR CAMERA Front View 1 2 3 4 5 6 8 1. 2. 3. 4. Shutter release button Mode dial Power switch Flash 7 5. 6. 7. 8.
Rear View 1 2 3 4 5 6 7 8 9 10 11 14 13 1. LED indicator 2. / Zoom in (telephoto) button / Zoom out (wide-angle) button 3. Playback button 4. Strap holder 5. Arrow button (Up) Self-timer button 6. Arrow button (Right) Focus EN-14 12 7. 8. button Arrow button (Down) Exposure compensation button 9. Delete button 10. Arrow button (Left) Flash button 11. MENU button 12. Battery / SD / SDHC card cover 13. Tripod socket 14.
LCD Monitor Information Camera Mode 1. Mode indication [ ] Program Mode [ ] Portrait Mode [ ] Panorama Mode [ ] Sport Mode [ ] Night Mode [ ] Movie Mode [ ] Auto Mode 2. Flash mode [ ] Auto [ ] Red-eye [ ] Flash on [ ] Flash off 3. Capture mode [ ] Single [ ] Burst [ ] AEB [ ] 2 sec. Self-timer [ ] 10 sec. Self-timer [ ] 10+2 sec. Self-timer 4. Focus mode [ ] Standard [ ] Macro [ ] Infinity 5. Possible number of shots 6. Memory status : Built-in memory (without card) : SD/SDHC memory card 7.
1. 2. 3. 4. 5. 6. 7. Movie Mode Movie mode Flash mode Recordable movie time available Memory status Battery power indicator Focus area Zoom bar 1 2 3 4 00:00:49 5 6 7 Image Playback 1. Playback mode 2. Number of image 3. Memory status 4. Battery power indicator 5. Index number of total number 6. DPOF indicator 7. Protect indicator 8. Date 9. Time 10. Aperture 11. Shutter speed 12. EV compensation 13. ISO sensitivity 14. White balance 15. Image quality 16. Recorded pixels Movie Playback 1.
PREPARING THE CAMERA Installing the Batteries You can use 2 AA size batteries (Ni-MH rechargeable or alkaline) to power the camera. Make sure that the power of the digital camera is off before inserting or removing the batteries. 1. Make sure the camera is turned off. 2. Open the battery cover. 3. Insert the batteries in the correct orientation as shown in the illustration. 4. Close the battery cover.
Inserting and Removing an SD/SDHC Memory Card (Optional Accessory) The digital camera comes with 16MB of internal memory, allowing you to store captured still images or video clips in the digital camera. Moreover, you can also expand the memory capacity by using an optional SD/SDHC memory card so that you can store more files. 1. Make sure your camera is turned off before inserting or removing a memory card. 2. Open the SD/SDHC memory card cover. 3.
Attaching the Camera Strap Attach the strap as shown in the illustration. LED Indicators and Self-timer Indicators Indicators State Description/Activity LED indicator Solid green The digital camera is on. LED indicator Blinking red and green USB transfer in progress LED indicator Blinking red and green Charging the flash. Self-timer indicator Blinking blue The self-timer function is activated.
GETTING STARTED Turning the Power On/Off Press the power switch until the digital camera turns on. To turn the power off, press the power switch again. Power switch Choosing the Screen Language Follow the steps below to choose the desired language. 1. Rotate the mode dial to and turn your camera on by pressing the power switch. 2. [Set-up1] is displayed. 3. Use the four-way controller (T) to select [Language], then press the button. 4. Use the four-way controller (ST) to select the language you want.
Setting the Date and Time Follow the steps below to set the date display style, current date and time. 1. Rotate the mode dial to and turn your camera on by pressing the power switch. 2. [Set-up1] is displayed. 3. Use the four-way controller (T) to select [Date & Time] and the four-way controller (WX) to switch the date types, then press the button. Set-up1 Set-up2 Set-up3 Format Beeper Louder Date te & Tim Time m/d/y Language Langu English Englis En lish Select : 4.
Formatting an SD/SDHC Memory Card or Internal Memory The term “Formatting” means preparing an “SD/SDHC memory card” to record images; this process is also called “initialization”. This utility formats an SD/SDHC memory card or the internal memory and erases all stored images and data. 1. Rotate the mode dial to and turn your camera on by pressing the power switch. [Set-up1] is displayed. 2. Use the four-way controller (T) to select [Format], then press the button.
Using the LCD Monitor Your camera is equipped with a 2.4” full color TFT LCD monitor to help you compose images, replay recorded images/movie clips or adjust menu settings. The mode icons, text and numbers displayed on the monitor may vary according to the current settings. 1. Rotate the mode dial to , , , , , or . 2. Press the power switch to turn on the power. 3. Compose your scene on the LCD monitor. 4. Press the shutter release button. • The LCD monitor darkens in strong sunlight or bright light.
PHOTOGRAPHY MODE Shooting Images 1. Rotate the mode dial to , , , , , or and turn your camera on by pressing the power switch. 2. Compose the image on the LCD monitor screen so that the main subject is within the focus frame. 3. Press the shutter release button down halfway to focus the image. When you press the shutter release button down halfway, the camera’s Auto Focus feature automatically focuses the image. The focus frame turns green if the subject is in focus.
Mode Dial You can select from seven shooting modes and setup mode according to shooting conditions to achieve the desired effect. 8 1 7 2 6 3 5 4 Mode Description 1. Program Select this mode to permit the ISO, EV, and White Balance to be set manually. 2. Portrait Select this mode to make people stand out with the background out-of-focus. 3. Panorama Select this mode to take a series of shots then stitch them together with software to make a single photo. 4.
Setting Image Resolution and Quality As you get to know the digital camera, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot.These settings affect the number of images that can be stored in the internal memory, or on an SD/SDHC memory card. Higher resolution and higher quality images provide finer detail but cause the images’ file size to be larger.
Using the Zoom Function This camera is equipped with 3x optical zoom. The lens moves during the optical zoom photography, allowing you to capture telephoto and wide-angle shots. By using the optical zoom function, images appear closer by pressing the button, or smaller away by pressing the button. The zoom bar indicates the current level of 3 magnification. When the digital zoom is within 3x magnification, the zoom bar is within the optical zoom range.
Using the Flash The flash is designed to function automatically when lighting conditions warrant the use of flash. You can take an image using a desired flash mode to suit your circumstances. 1. Rotate the mode dial to , , , , , or . 2. Press the power switch to turn on the power. Flash lash Mode Mod 3. Press the four-way controller (W/ ). The Aut Auto uto flash mode changes each time the button is pressed. You can also change the setting using the four-way controller OK : (ST). 4.
Setting Focus Images can be captured with the focus determined automatically using auto focus. You may over-ride the auto focus and specify [ ] macro or [ ] infinity. 1. Rotate the mode dial to , , , , , or . 2. Press the power switch to turn on the power. 3. Press the four-way controller (X/ ). The focus mode changes each time the button is pressed. You can also change the setting using four-way controller (ST). 4. Press the button to confirm the setting. 5.
CAPTURE MODE Burst This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter release button is pressed. Secure the camera to a tripod or place it on a stable surface. 1. Rotate the mode dial to , , , , , or . 2. Press the power switch to turn on the power. Captu pture e Mod Capture Mode 3. Press the four-way controller (S/ ) and Burst Bu use (S) to select [Burst]. You can also change the setting using four-way controller (WX). OK : 4.
Auto Bracket In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter release button once. Auto Bracket settings can be combined with exposure compensation settings to extend the adjustment range. 1. Rotate the mode dial to , , , , , or . 2. Press the power switch to turn on the power. Captu pture e Mod Mode Capture 3. Press the four-way controller (S/ ) and AEB use (S) to select [AEB].
Self-Timer The self-timer can be used in situations such as group shots. When using this option, you should either mount the camera on a tripod (recommended) or rest it on a flat, level surface. 1. Secure the camera to a tripod or place it on a stable surface. 2. Rotate the mode dial to , , , , , or . Captu Capture pture e Mod Mode 3. Press the power switch to turn on the 2 sec. Self-timer power. 4. Press the four-way controller (S/ ) and use (S) to select your desired self-timer OK : mode.
Adjusting the Exposure (EV Compensation) You can manually adjust the exposure determined by the digital camera. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (difference between bright and dark areas) between the subject and the background is extremely high. The EV compensation value can be set in the range from -2.0EV to +2.0EV. 1. Rotate the mode dial to , , , , or . 2. Press the power switch to turn on the power. 3.
Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. 1. Rotate the mode dial to , , , , or . 2. Press the power switch to turn on the power. 3. Press the MENU button. [Mode1] is displayed. 4. Use the four-way controller (T) to select [W. Balance], then press the button. 5. Use the four-way controller (ST) to select the desired white balance setting, then press the button to confirm. 6.
PLAYBACK MODE - THE BASICS Viewing Images You can display the still images one by one. 1. Rotate the mode dial to , , , , 100-0001 , or and turn your camera on by pressing the power switch. 2. Press the button. The last recorded image appears on the LCD monitor screen. Basic information is shown by indicators on the LCD monitor screen. To see full information display, press the button. 3. Use the four-way controller (WX) to select the desired images.
Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view fine details. The zoom factor displayed on the screen shows the current magnification ratio. 1. Press the button. The last recorded image appears on the LCD monitor screen. To view the previous image, press the four-way controller (W). To view the next image, press the four-way controller (X). 1.5X 2. Adjust the zoom ratio by using the / button.
Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor screen simultaneously so you may search for a particular image. 1. Press the button. The last recorded image appears on the LCD monitor screen. 1 2 3 2. Press the button once. Nine thumbnail images are displayed 4 5 6 simultaneously. For recorded movie clips, the movie mode icon will be displayed. 7 8 9 For protected images/movie clips, mark will be displayed.
Slideshow Display The slideshow function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations. 1. Press the button. The last recorded image appears on the LCD monitor screen. 2. Press the MENU button to access the Playback menu. Then use the four-way controller (T) to select [Slide Show] and press the button. Playback1 Playba Protec otect Protect DPOF Select : Retu Return eturn n: 3.
Resizing an Image You can change the image size of a captured image to one of the following sizes: 2048 x 1536 pixel, 1280 x 960 pixel and 640 x 480 pixel. 1. Press the button. Playback1 Playba Playback2 Playba The last recorded image appears on Resi Resize esize the LCD monitor screen. 2. In the mode, use the four-way Quality Change controller (WX) to select the desired Copy Co y To o Card Ca images. To view the previous image, press the four-way controller (W).
MOVIE MODE Recording Movie Clips This mode allows you to record movie clips with sound via built-in microphone. 1. Rotate the mode dial to and turn your camera on by pressing the power switch. 2. Press the shutter release button to start recording. 3. To stop recording, press the shutter release button again. 00:00:49 • The optical zoom function (3X) can be activated before you start recording the movie clips • The digital zoom function can be activated before and during the recording.
Playing Back Movie Clips You can play back the recorded movie clips on the LCD monitor screen. However, the sound recorded with movie clips can only be played back on a computer. 1. Press the button. 2. Use the four-way controller (WX) to go through the images until the movie clip you want to play back is displayed. To view the previous image, press the four-way controller (W). To view the next image, press the four-way controller (X). 3. Press the button to start playing back the movie clips.
PLAYBACK MODE - ADVANCED FEATURES Deleting Images/Movie Clips Use this function to delete one or all images/movie clips stored in SD/SDHC memory card or the internal memory. Please note that the deleted images or movie clips cannot be recovered. Exercise caution before deleting a file. 1. Rotate the mode dial to , , , , , or and turn your camera on by pressing the power switch. 2. Press the button. The last recorded image/movie clip appears on the LCD monitor screen. 3.
Protecting Images/Movie Clips Set the data to read-only to prevent images from being erased by mistake. 1. Press the button. The last recorded image appears on the LCD monitor screen. 2. In the mode, use the four-way controller (WX) to select the desired images. To view the previous image, press the four-way controller (W). To view the next image, press the four-way controller (X). 3. Press the MENU button, then use the four-way controller(T) to select [Protect] and press the button. 4.
Setting the DPOF DPOF (Digital Print Order Format) allows you to embed printing information on your SD/SDHC memory card. By using DPOF, you can select an image to be printed and then specify how many prints or which image you would like. Take your SD/SDHC memory card to a DPOF enabled printer that accepts SD/SDHC memory cards. The DPOF/card-compatible printer will read the embedded information on the SD/SDHC memory card and print your images as specified.
4. Use the four-way controller (ST) to select by your preference, then press the button. [Quantity]: Allows you to select image quantity (0~10). Use the four-way controller (WX) to set the image quantity. [Date]: The date of recording can be printed directly on the images. Select [With] or [Without] with the four-way controller (WX). 5. Press the MENU button to return to the image playback mode. The print icon is marked on the displayed image.
TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR COMPUTER System Requirements (Windows) Pentium III 600 MHz or higher Windows 2000/XP/Vista 64MB RAM 128MB hard disk space CD-ROM drive Available USB port System Requirements (Macintosh) PowerPC G3/G4 OS 9.
Connect the digital camera to your computer 1. Rotate the mode dial to and turn your camera on by pressing the power switch. 2. Press the four-way controller (X) to select the [Set-up2] menu, then use the four-way controller (T) to select [USB Mode]. 3. Press the button. 4. Use the four-way controller (T) to select [PC], then press the button. 5. Turn off your camera. 6. Connect your camera and the computer via the supplied USB cable. 7. Turn your camera on by pressing the power switch. PC/Video terminal 8.
Download images or movie clips When the digital camera is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download (transfer) images by copying them from the “Removable disk” (“untitled” or “unlabeled” disk on a Macintosh) to your computer hard drive. Windows Open the “removable disk” and double click on the DCIM / DSCIM folder to open it to find more folders. Your images are inside these folder(s).
EDITING SOFTWARE INSTALLATION Installing Photo Explorer Ulead® Photo Explorer provides a simple and efficient way to transfer, browse, modify and distribute digital media. Acquire photos, video or sound clips from various digital device types and easily browse or add personal descriptions; make timely modifications; or distribute the media through the medium of your choice: E-mail, Print, Slideshow Presentations.
Installing Photo Express Ulead® Photo Express is complete photo project software for digital images. The step-by-step workflow, visual program interface, and in-program help assist users in creating exciting photo projects. Acquire digital photos effortlessly from digital cameras or scanners. Organize them conveniently with the Visual Browse mode. Use hundreds of ready-to-use templates such as albums, cards, posters, slideshows, and more.
Installing Cool 360 Ulead® COOL 360™ quickly and easily allows photo editing consumers to transform a series of photos into 360° or wide-angle panoramic scenes for an immersive viewing experience. COOL 360’s intuitive interface and easy-to-use wizard deliver great-looking panoramas fast while advanced warping, blending and alignment tools ensure excellent results. Share finished panoramas via email, create Web pages or insert them into documents and presentations. 1.
MENU OPTIONS Camera Menu This menu is for the basic settings to be used when capturing still images. Aut Auto uto Mode1 Im ge Size Image Si Mode2 Mode3 Im ge Size Si Image Quality Mode1 Select : Mode3 Mode1 Mode2 Mode3 Color Quality Digital Zoom On Sharpnes Sha pness Sharpness Medium W..
In the , , , Mode1 settings , or Mode. Item Functional Description Image Size Refer to the section in this manual titled “Setting Image Resolution and Quality” for further details. Quality Refer to the section in this manual titled “Setting Image Resolution and Quality” for further details. W.Balance Sets the white balance when shooting under a variety of lighting conditions and permits photographs to be taken that approach the conditions that are seen by the human eye.
Mode3 settings Item Functional Description Color Sets the color of the image that will be captured. Full Color Black & White Sepia Sharpness Sets the level of image sharpness. High Medium Low Saturation To capture an image, your camera offers you three different degrees of color to match with your preference. Your images will demonstrate different impression by selecting different degrees of color. This is called “Saturation”.
Movie Menu This menu is for the basic settings to be used when recording movie clips. Vide Video ideo Color Digital Zoom Retu Return eturn n: On Select : 1. Rotate the mode dial to and turn your camera on. 2. Press the MENU button. 3. Press the four-way controller (ST) to select the option item. Then press the button 4. Press the four-way controller (ST) to select the desired setting, then press the button. 5. To exit the movie menu, press the MENU button.
Playback Menu In the menu, set the settings used for playback. Playback1 Playba Playba Playback2 Playback1 Playba Playback2 Playba Slide Show Sh Resi Resize esize Protec otect Protect Quality Change DPOF Copy Co y To o Card Ca Select : Retu Return eturn n: Retu Return eturn n: Select : 1. Press the button. The last recorded image appears on the LCD monitor screen. 2. Press the MENU button, then use the four-way controller (ST) to select the [Playback1] / [Playback2] menu. 3.
Playback2 Item Functional Description Resize Changes the size of a recorded image. Resizing replaces the original image with the changed image. Only resizing to a smaller size is available. Refer to the section in this manual titled “Resizing an Image” for further details 2048x1536 1280x960 640x480 Quality Change Changes the quality (compression rate) of a recorded image. Compresses images and overwrites an old size images with a newly compressed image.
Setup Menu This feature allows you to set up the default settings by preference for using your camera. Set-up1 Set-up2 Set-up3 Beeper Time te & Tim Date Langu Language Set-up1 Set-up2 USB Mode Format Louder LCD Brightness m/d/y Auto Shut Down Set-up3 PC Set-up1 Set-up2 Set-up3 eset Number Numbe 1 Reset Set To o Default De Defaul ault 3 Min. Version Versio sion English Englis En lish Select : Select : Select : 1. Rotate the mode dial to mode and turn your camera on. 2.
Set-up2 settings Item Functional Description USB Mode Selects to choose one of the following modes for further settings. PC / PictBridge LCD This sets the brightness of the LCD monitor screen. Brightness The adjustment range is from -5 to +5. Auto Shut Down If no operation is performed for a specific period of time, the power to the camera is automatically turned off. This feature is useful to reduce battery wear. 2 Min. / 3 Min. / 5 Min.
SPECIFICATIONS Item Description Image Sensor CCD Effective pixels 5.0 Mega pixels Image size Still image: 2560 x 1920, 2048 x 1536, 1280 x 960, 640 x 480 Movie clip: 320 x 240 Image quality Still image: Fine / Normal / Economy Movie image: QVGA Recording media Approx. 16MB internal memory SD/SDHC memory card (Optional, up to 4GB) File format JPEG (Exif 2.2), DCF, Motion JPEG (AVI) Lens F-no.: Wide: 2.8 / Tele: 4.8 Focal length: 5.5mm~16.
TROUBLESHOOTING GUIDE Symptom Possible causes Solutions / Corrective Actions Power does not turn on. * The battery has run out. * The battery is not oriented correctly. * The battery cover is not closed properly. * Load new or fully charged battery. * Load the battery in the correct direction. * Close the battery cover correctly. Camera suddenly powers down. * The function of [Auto Shut Down] in the mode has been activated. * The battery has run out.
POSSIBLE NUMBER OF RECORDABLE IMAGES The frame counter indicates the approximate number of images that can be stored on the internal memory and the SD/SDHC memory card. The number of recordable images may vary depending on the recorded subject, the capacity of the memory card, if there are files other than images or when the recording is made while switching the picture quality or resolution.
CONNECTING TO A PICTBRIDGE-COMPATIBLE PRINTER Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge to perform image selection and printing using the camera screen and controls. DPOF support also lets you specify which images you want to print and how many copies of each should be printed. Connecting the camera to the printer 1. Rotate the mode dial to and turn your camera on by pressing the power switch. 2.
Printing images When the camera is properly connected to a PictBridge-compatible printer, the [Printing Mode Select] screen is displayed on the LCD monitor screen. Use the four-way controller (ST) to select the print mode. In [Print] Mode: Lets you print the specified image with PictBridge. Step Figure Procedure Printing Mode Select Print 1 Print All Use the four-way controller (ST) to select the [Print] mode, then press the button.
Step Figure Procedure Tr ansfer ring 1/3 6 Cancel : Print Continue Cancel This starts printing and displays the message “Transferring” on the LCD monitor screen.The message will disappear after the printing is finished. Then the screen returns to [Printing Mode Select]. To cancel printing: Pressing the button during print data transfer displays the screen for selecting whether to [Continue] or [Cancel] printing. OK : In [Print All] Mode: Lets you print all images with PictBridge.