Instruction manual

92
Using the auto divide function
When you are performing line-in recording from
a CD player, MD player, or another external
device, you can use the auto divide function to
automatically divide recorded input into files. If
this function is turned on, when the unit detects a
silence exceeding two seconds, it pauses recording
and interprets the silence as the break between
two sound tracks. It automatically divides the input
as follows: file 1 for track 1, file 2 for track 2, etc.
• This function is valid only during line-in
MP3 recording.
1
Turn on the power, and press
the MENU/PLAY LIST button.
2
Press the VOL (+/–) button to
select “REC MENU”, and then
press the
/OK button.
3
Press the VOL (+/–) button to
select the “AUTO DIVIDE” setting,
and then press the
/OK button.
4
Press the VOL (+/–) button to
select “OFF” or “ON”, and then
press the
/OK button.
OFF
ON
00
25
0
45
16
m
h
s
m s
AD
1/2
FLAT
A
MP3 128 k
【AUTO DIVIDE】
MIC
ST
A
SD
MIC
ST
A
SD
＊ ONLY FOR
LINE REC MP3
REC REMAIN TIME
Auto divide indicator
Press the MENU/PLAY LIST button
to exit the menu.
• When you turn on the “AUTO DIVIDE”
setting, its icon appears on the screen.
Using the self timer
During microphone recording, you can
specify when recording will begin after you
press the REC button. This function is very
useful where you need time for preparation
before recording should start – for example
in musical instrument practice.
1
Turn on the power, and press
the MENU/PLAY LIST button.
2
Press the VOL (+/–) button to
select “REC MENU”, and then
press the
/OK button.
3
Press the VOL (+/–) button to
select the “SELF TIMER”, and
then press the
/OK button.
4
Press the VOL (+/–) button to
select a value for the self timer,
and then press the
/OK
button.
【SELF TIMER】
OFF
5sec
10sec
30sec
MIC
ST
A
SD