Operation Manual

EN-58
Setup Menu
This feature allows you to set up the default settings by preference for using your
camera.
1. Rotate the mode dial to mode and turn your camera on.
2. Press the four-way controller (WX) to select the [Set-up1] / [Set-up2] / [Set-up3]
menu.
3. Use the four-way controller (ST) to select the desired option item, then press the
button.
4. To exit the setup menu, rotate the mode dial to another mode.
 Set-up1 settings
Item Functional Description
Format Erases all images and reformats the SD/SDHC memory card loaded in
your camera. Protected images are also erased. SD/SDHC memory
card cannot be formatted if it is write-protected.
Refer to the section in this manual titled “Formatting an SD/SDHC
Memory Card or Internal Memory” for further details.
Beeper This sets whether or not to mute the start-up sound, and the camera
sound each time you press a camera button.
Louder / Soft / Off
Date &
Time
This sets the date and the time.
Refer to the section in this manual titled “Setting the Date and Time”
for further details.
d/m/y
m/d/y
y/m/d
Language Sets the language that is displayed on the LCD monitor screen.
Refer to the section in this manual titled “Choosing the Screen
Language” for further details.
Set-up1
Set-up1
Set-up1 Set-up2
Set-up2
Set-up3
Set-up3
Set-up2 Set-up3
Langu
Language
Da
te & Tim
te & Time
Beeper
Beeper
Format
Language
For mat
Date & Time
Beeper
Select :
Select :
Select :
En
Eng
lis
lish
English
m/d/y
m/d/y
Louder
Louder
m/d/y
Louder
Select :
Select :
Select :
Set-up1
Set-up1
Set-up1 Set-up2
Set-up2
Set-up3
Set-up3
Set-up3Set-up2
Ver
sio
sion
Set
Set T
o De
o Def
aul
ault
R
eset Numbe
eset Number
Reset Number
Version
Set To Default
11
Select :
Select :
Set-up1
Set-up1
Set-up2
Set-up2 Set-up3
Set-up3
Set-up3
USB Mode
USB Mode
PC
Auto Shut Down
LCD Brightness
3 Min.
Auto Shut Down
LCD Brightness
3 Min.
PC