Operation Manual

EN-28
Setting Image Resolution and Quality
As you get to know the digital camera, you can set the image resolution (number of vertical and
horizontal pixels) and image quality (compression ratio) based on the types of images you want to
shoot.These settings affect the number of images that can be stored in the internal memory, or on an SD/
SDHC memory card.
Higher resolution and higher quality images provide finer detail but cause the images’ file size to be
larger.
To change image resolution or image quality, perform these steps below:
1. Rotate the mode dial to , , , , , or and turn your
camera on by pressing the power switch.
2. Press the MENU button.
 [Mode1] is displayed.
 In the mode, [Auto] is displayed.
3. Use the four-way controller (T) to select [Image Size], then press
the button.
4. Use the four-way controller (ST) to select the desired setting, then
press the button to confirm.
5. Follow the step 3 and 4 above to set the [Quality].
• The possible number of shots and recording time depend on the storage size, resolution and quality
settings and the subject of the image to be captured.
• You can resize the images later. Please refer to the section in this manual titled “Resizing an Image”
for further detail.
Mode1Mode1
Mode1
Mode1 Mode2
Mode2
Mode3
Mode3
Mode2 Mode3
Select :
Select :
Select :
ISO
ISO
Quality
Quality
Im
Ima
ge Si
ge Size
Image Size
W
. Balanc
. Balance
R
etu
etur
n
n :
ISO
Quality
W. Balance
Return :
Im
Ima
ge Si
ge Size
Image Size
Select :
Select :
Select :Cancel :
Cancel :
Cancel :
2816 X 2112
2816 X 2112
2204 X 1728
2204 X 1728
1600 X 1200
1600 X 1200
640 X 480
640 X 480
2816 X 2112
2304 X 1728
1600 X 1200
640 X 480