Operation Manual

EN-69
CONNECTING TO A PICTBRIDGE-COMPATIBLE
PRINTER
Even if you do not have a computer, you can connect the camera directly to a printer that supports
PictBridge to perform image selection and printing using the camera screen and controls. DPOF support
also lets you specify which images you want to print and how many copies of each should be printed.
Connecting the camera to the printer
1. Rotate the mode dial to and turn your camera on by pressing the power switch.
2. Press the four-way controller (X) to select the [Set-up2] menu, then use the four-way controller (T) to
select [USB Mode]. Press the button.
3. Use the four-way controller (ST) to select [PictBridge], then press the button.
4. Connect your camera and the printer via a supplied USB cable.
 The message “One moment” will appear on the LCD monitor screen.
Printing images
When the camera is properly connected to a PictBridge-compatible printer, the [Printing Mode Select]
screen is displayed on the LCD monitor screen. Use the four-way controller (ST) to select the print
mode.
 In [Print] Mode: Lets you print the specified image with PictBridge.
Step Figure Procedure
1
Use the four-way controller (ST) to select the [Print] mode, then press the
button.
Printing Mode Select
Printing Mode Select
Printing Mode Select
OK :
OK :
OK :
Print
Print
Print
Print All
Print All
Print
Print W
ith DPO
ith DPOF
Print All
Print With DPOF