User's Manual

B-8 VS-600 Programming
B.3.4 Wireless Tool Tab
The Wireless Tool Tab allows you to view a list of wireless devices programmed on the resident
unit. A resident unit can support up to 4 wireless pendants and 4 wireless pull cords, for a total
of 8 devices.
If the maximum number of devices are programmed in the resident unit, one must be removed
before a new one can be programmed. Use this tab to deprogram devices from the resident unit.
Wireless Tool
Tab
Click Get all used to download a list of devices programmed on the resident unit. The list
shows the devices’ serial numbers.
To remove a device, select a device in the list and click Remove selected to remove the device.
To remove all the programmed devices from the resident unit, click Remove all.
For information about programming wireless pendants and pull cords in the resident unit, refer to
section
C.6.
The resident unit can be configured to accept calls from all wireless devices without needing
them to be programmed first. See section
B.6 for more information about configuring a resident
unit for use in a common area.