User's Manual

C-4 Installation
C.3 Mounting the Power Supply Unit
The PSU is wall-mounted using either a Book Mount Kit or Picture Mount Kit. The PSUs are of
universal design, allowing for different wall-mounting positions. The PSU must be mounted
close to a power outlet.
C.3.1 Book Mount Installation
Materials Required: - Power Supply Book Mount Kit (purchased separately, part# T3-PSU-WMK-B)
- Two #10 wall-mounting screws with anchors (not provided)
- Four 6-32 ¼” PSU mount screws (provided with mount kit)
1. Place two screws and anchors in the wall corresponding to the Book Mount holes (13”
apart). Ensure that the anchors are correctly chosen for the wall material and screw size,
and that the wall, screw, anchor combination will securely support the weight of the T3-
PSU (7 lbs.)
2. Place the Book Mount over the screws and tighten the screws to secure Book Mount into
place.
3. Place the PSU into the Book Mount and secure into place with four PSU mount screws
(two screws on each side).