User's Manual

VS-600 Resident Unit Manual C-5
C.3.2 Picture Mount Installation
Materials Required: - Power Supply Picture Mount Kit (purchased separately, part# T3-PSU-WMK-P)
- Four #10 wall-mounting screws with anchors (not provided)
- Six 6-32 ¼” PSU mount screws (provided with mount kit)
1. Place four screws and anchors in the wall corresponding to the Picture Mount holes (8 ¾”
apart horizontal and 8 ½” apart vertical). Ensure that the anchors are correctly chosen for
the wall material and screw size, and that the wall, screw, anchor combination will
securely support the weight of the T3-PSU (7 lbs.)
2. Place the Picture Mount frame over the screws and tighten the screws to secure Picture
Mount frame into place.
3. Place the PSU into the Picture Mount and secure into place with six PSU mount screws
(three screws on each side).