User's Manual

A-2 Introduction
The Resident Unit is line powered from the single line station ports, eliminating the need for an
external power supply. The Unit is designed for installation into a standard 3-gang electrical
back box with 3-9/32" mounting centers.
A.2 Overview of Peripheral Devices
Described below are the peripheral devices that can function with the Resident Unit.
Wireless Pendant
The Wireless Pendant is worn by a VS-600 Resident user to allow him or her to
move freely about a room yet have the ability to place a call. Calls are initiated
by pressing a red call button on the Pendant.
Wireless Pull Cord Station
The Wireless Pull Cord Station offers the VS-600 Resident user the flexibility
of being able to position a Pull Cord Station anywhere in the room. This makes
it ideal for strategically positioning near furniture or in a bathroom or shower. It
makes it a cost effective "Add on" to the system without costly installation or
wiring upgrades.
Calls are initiated by pulling on the nylon pull cord. A call assurance LED
illuminates briefly and a soft tone sounds at the Station to confirm the
placement of the call. The call can be canceled at the Station by pressing a cancel button. An
illuminated LED and a tone at the Station confirm the cancellation of the call.
The Wireless Pull Cord Station is suitable for surface mounting directly to a wall. No backbox or
special mounting hardware is required.
NC-C1 Call Cord
A traditional Call Cord that plugs into the VS-600 Resident Unit to
provide the convenience of being able to initiate a call remotely from a
bedside.
Wired Pull Cord Station
The Wired Pull Cord Station provides call capabilities from resident
bathrooms and showers. The Station connects to the input on the VS-600
Resident Unit. Calls are initiated by pulling on the Station’s nylon call
cord, and annunciate at the attendant's telephone with a unique call priority.
The call can be canceled at the Resident Unit or from the attendant's
telephone.