User's Manual

Page 2 of 8
OEM INTEGRATOR ATTESTATION
a. This module is for OEM installation only.
b. The OEM is responsible for ensuring that the end-user has no manual
instructions to remove or install module.
c. The module is limited to installation in mobile or fixed applications,
according to Part 2.1091(b).
d. Separate approval is required for all other operating configurations,
including portable configurations with respect to Part 2.1093 and different
antenna configurations.
e. This module may only be used with antennas with a maximum gain of 2.15
dBi, including any replacement antennas, to maintain compliance and
satisfying RF exposure compliance.
f. Labeling instructions of finished products must be in accordance with the
requirements outlined in KDB784748 D01 v07, section 8. Page 6/7 last two
paragraphs which include the required instructions; example: “Contains
Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID:
XYZMODEL1” and described herein.
g. The instructions/statements required per Part 15.19 and 15.21must be
included in the host user’s manual (i.e. end product).
Robert A. Bongiorno
Chief Engineer
The Sapling Company
[e-mail]
(215) 322 – 6063 x1114