Installation Manual

48
The Sapling Company, Inc.
670 Louis Drive
Warminster, PA 18974
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
sbdconfig - Setting up sbdconfig.exe (ctd.)
7. Scroll down to Universal Serial Bus controllers
and click the + sign to open.
8. Double-click on the “USB Serial Converter” and
a new window will open.
If the USB Serial Converter does not appear,
look for a new item called USB Half UART under the
Device Manager category “Other Devices”. Within
five minutes, the Device Manager will refresh,
the USB Half UART will vanish, and the USB Serial
Converter will be listed in the correct category.
This will often happen the first time that the cable
is being used with a new computer, and rarely
happens after that.
9. Click in the Advanced tab and check the box
next to ‘Load VCP’ and click OK.