User Manual
Table Of Contents
- AMD Radeon™ R9 380 Series Graphics
- Contents
- Chapter 1 Getting Started
- Chapter 2 Hardware and Software Installation
- Chapter 3 Display Configuration
- Chapter 4 AMD CrossFire Technology
- Chapter 5 Reference
- Troubleshooting
- Graphics Card Installation Troubleshooting
- Troubleshooting AMD CrossFire
- Change Motherboard BIOS Settings
- Use Graphics Cards with Different Amounts of Memory
- Card Reversal Recommended
- 3D Client is Active
- AMD CrossFire is Currently Unavailable
- Screen Rotation is Unavailable or Does Not Work
- Video Displays Flicker During System Startup
- AMD CrossFire Disabled after Swapping/Moving Cards
- HDTV Adapter Troubleshooting
- Customer Care
- International Compliance Information
- FCC Compliance Information (USA)
- Industry Canada Compliance Statement (Canada)
- CE Compliance Information (European Union)
- Electrical Safety
- VCCI ITE Compliance Information (Japan)
- KC Certification Information (Korea)
- BSMI Certification Information (Taiwan)
- RCM (Australia and New Zealand)
- Product Environmental Compliance
- Waste Electrical and Electronic Equipment (WEEE) Directive Compliance (European Union)
- Troubleshooting
•
One AMD CrossFire internal bridge interconnect per additional board
(included).
•
600-watt or better power supply with four 6-pin power connectors.
•
8 GB (or greater) of system memory is recommended.
•
System case that allows for good airflow and cooling (highly recommended).
1.2 Recording the Serial and Part Numbers
Write down the serial number and part number before installing the graphics card.
The serial number and 102 part number on the graphics card are required for
registration and free support. They are located on a sticker on the back of the card.
The emphasized numbers in bold are required for registration and free support.
Figure 1–1 Sample Serial and Part Numbers
2 Getting Started
AMD Radeon™ R9 380 Series Graphics © 2016 Advanced Micro Devices, Inc.