Datasheet

2
Remove any existing VGA Card from
your computer.
Or, if your computer has any on-board
graphics capability, you may need to
disable it on the motherboard. For more
information, see your computer
documentation
.
(If
the old VGA Card sticks, rock it
gently
from end to end. Remember to save
the
screw.)
Locate the slot. If necessary, remove the
metal cover from this slot; then align your
VGA Card with the AGP/PCI slot, and
press it in firmly until the card is fully
seated
.
(Grasp the VGA Card by the top edge
and
carefully seat it into the slot. Ensure
that the metal contacts are completely
pushed into the slot.)
` Replace the screw to fasten the card in
place, and replace the computer cover.
Plug the display cable into VGA Card; then
turn on the computer andmonitor. If your
VGA Card came with a DVI connector, you
can connect a flat panel display to the
appropriate connector, as shown ...
(Make
sure all cables are securely
connected.
)
Screw
Ex
isting
VGA Card
VGA Card
Slot
Scre
w
VGA Card
Display Cable
To VGA Monitor
(All VGA Cards)
To Flat Panel/LCD Display
(DVI-Ready
VGA Cards Only)
Installing Your VGA Card