User`s manual


~31~

Memory Configuration
Memory Clock
Allows you to select the system memory clock.
Options: Auto, DDR3-800, DDR3-1066, DDR3-1333, DDR3-1600, DDR3-1866,
DDR3-2133.
CAS# Latency (tCL)
Set the CAS latency time. CAS stands for Column Address Strobe or Column
Address Select.
Options: Auto(11), 5 ~ 14..
RAS# to CAS# Delay (tRCD)
Set the RAS to CAS Delay time for Read/Write commands to the same bank.
Options: Auto(11), 2 ~ 19.
Row Precharge Time (tRP)
Set the Row Precharge time. This is the Precharge-to-Active or Auto-to-Refresh
of the same bank.
Options: Auto(12), 2 ~ 19.
RAS# Active Time (tRAS)
Set the minimum RAS# active time.
MemoryClock DDR3‐1600  [Auto]
CASLatency (tCL) 11 [Auto]
RAS#toCAS#Delay (tRCD) 11 [Auto]
RowPrechargeTime (tRP) 12 [Auto]
RAS#ActiveTime (tRAS) 28 [Auto]
WriteRecoveryTime (tWR) 12 [Auto]
RowRefreshCycleTime (tRFC) 160 [Auto]
WritetoReadDelay (tWTR) 6 [Auto]
ActivetoActiveDelay (tRRD) 5 [Auto]
ReadCAS#Precharge (tRTP) 6 [Auto]
FourActiveWindowsDelay (tFAW) 24 [Auto]
RowCycleTime (tRC) 39 [Auto]
RefreshRate (tREF) 7.8 [7.8us] 
CommandRate2 [Auto]

Thisoptionallows
usertoselect
differentMemory
Clock.

46
41
28
100
3827
16384
1600
1.456
1.232
1.096
1.528