User Manual

ManualsBrandsSaramonic ManualsMusical InstrumentsSmartrig Uc Usb-C Adapter - MICROPHONE / INSTRUMENT PREAMP ADAPTER FOR USB-C DEVICES

User Manual

Product Structure

Speciﬁcations

Audio Adapter

The Saramonic SmartRig UC with USB Type-C interface

is an easy solution to connect any professional micro-

phones or guitars to record quality audio or create

music with your USB Type-C devices.

PRODUCT INTRODUCTION

General Introduction

The Saramonic SmartRig UC with USB Type-C interface

is an easy solution to connect any professional micro-

phones or guitars to record quality audio or create

music with your USB Type-C devices.

Simply plug the microphone into the XLR connector or

plug the guitar into the 6.35mm connector of the

SmartRig UC, and connect it to your devices with the

USB Type-C output cable.

The provided gain control thumbwheel makes it easy to

set precise levels. Processed sound can be monitored

through a 3.5mm headphone out.

Highlights

• Combo 1/4" (6.35mm) and XLR input

• USB Type-C output connector

• Powered by one 9V battery

• +48V phantom power

• 3.5mm headphone output for monitoring (need APP)

• +48V/OFF/ON switch

• Gain control

Frequency Response

Dimensions

Weight

Gain

SNR

THD

Sample Rate

Output

20Hz to 20kHz , +/- 0.5dBu

L 88 x W 41 x H 42 mm

75g ( 2.57oz. )

23dBu to - ∞

80dBu @1kHz,-30dBu input

less than 0.01%@1kHz,-30dBu input

44.1Khz or 48khz

USB Type-C connector

SmartRig UC

Summary of content (2 pages)

PAGE 1
SmartRig UC PRODUCT INTRODUCTION Frequency Response 20Hz to 20kHz , +/- 0.5dBu Dimensions L 88 x W 41 x H 42 mm Weight 75g ( 2.57oz. ) Gain 23dBu to - ∞ SNR 80dBu @1kHz,-30dBu input Simply plug the microphone into the XLR connector or plug the guitar into the 6.35mm connector of the SmartRig UC, and connect it to your devices with the USB Type-C output cable. THD less than 0.01%@1kHz,-30dBu input Sample Rate 44.
PAGE 2
QUICK START GUIDE 1. Install a 9V battery. Gently slide out the battery cover in the direction of the arrow at the back of unit. Insert the battery with the “+” positive terminal lined up with the “+” indicator on the battery compartment. 2. Connect your microphone to the XLR jack or connect your guitar to the 1/4’’ (6.35mm) jack of SmartRig UC. 3. Connect the SmartRig UC to your device’s USB Type-C interface. 4. Download a recording application. 5. Turn on the SmartRig UC.