SR-WM4C System VHF Wireless Microphone System
Product Introduction General Introductions The Saramonic SR-WM4C system is a compact and lightweight VHF wireless microphone system. Providing a perfect audio solution for recording free from the limit of distance. It is very helpful in film making, broadcast interview and business presentations. Highlights • Four switchable channels to keep you free from interference. • Detachable and flexible antenna can be rotated 360° accordingly for best sound. • The high-band VHF provides pure sound.
Transmitters Operating Frequencies 203-216MHz Modulation Frequency Modulation Signal to noise ratio 70dB or more Antenna 1/8あ wire antenna Voice delay 12ms Audio input connector SR-WM4C: mini XLR SR-HM4C: none SR-XLR4C: XLR-3-11C type (female) Current Consumption 150MA Battery LR6/AA size alkaline battery (not included) Battery life 5 hours Dimensions SR-WM4C: L102*W62*H44.7 mm SR-HM4C: L100.5*W43*H35mm SR-XLR4C: L105*W42*H35mm Weight SR-WM4C: 80g (2.
Current Consumption 150 mA Battery Life 5 hours Dimensions 102 x 62.0 x 44.7 mm Antenna Length 178mm Weight 80 g (2.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Antenna Power Indicator Microphone Input Jack Power Switch Belt Clip Channel Selector Switch Headphone Jack 1 1.
Hand-held Transmitter SR-HM4C 1 2 4 5 3 1. Battery indicator Solid Green: Sufficient battery level. Solid Red: Low battery 2. Power / Mute button ON, MUTE, OFF 3.
4. Battery compartment Operates on two AA batteries (not included). You could use alkaline, lithium or nickel metal hydride batteries. 5. Switchable 4 channels (A, B, C, D) XLR Plug-on Transmitter SR-XLR4C 1 2 3 4 5 6 7 8 1. XLR audio input jack Connects to an XLR microphone or audio devices with line output. 2. POWER indicator Indicates the battery level as follows: Solid Green: Sufficient battery level. Solid Red: Low battery. 3. +48V power indicator Lights up when the +48V phantom power is on.
4. MUTE indicator Blinking Green: Audio is muted (i.e., disabled). 5. Channel indicator (A, B, C, D) 6. Power / Mute button Turns the power or mute function to on or off. Function Operation Power ON Press button for one second or longer Power OFF Press button until it turns off Mute ON Mute OFF Short press button 7. SET button Long press the SET button to turn on/off the 48V phantom power. Short press the SET button to choose the channels from A to D. 8.
Setup Guide 1. Install battery The transmitters and receiver are each operated by two LR6/AA size alkaline batteries. Gently slide out the drawer or cover from the battery compartment. Insert the battery according to the indicator as shown. Slide the drawer closed until it clicks into place. NOTE: If the SR-WM4C will not be used for a long time, please remove the batteries to prevent product damage due to battery leakage.
4. Transmitter and receiver pairing. Both transmitter and receiver must be set to same channel (A, B, C, D). If the selected channel is noisy, please switch both the transmitter and receiver to other channels until you could get a very clear sound. NOTE: Two transmitters on the same frequency will not work with one receiver. 5. Turn the Power ON/OFF switch of both transmitter and receiver to the ON position. 6. Plug your earphone into the Phone Jack for real time monitor. 7.
Packing List SR-WM4C One SR-WM4C transmitter One SR-WM4C receiver One 1/8”(3.
www.saramonic.com The Saramonic logo is trademark which is registered and owned by Saramonic International. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Email: info@saramonic.
