Noise Cancelling Wireless Sport Headphones 无线运动降噪耳机 SR-BH5 User Manual 用户手册
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Statement Thank you for purchasing Saramonic! Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save manual for your future reference. If you need further assistance than the user manual, please consult with your retailer for help or email us: info@saramonic.
Product Overview ① Microphone ② Active Noise Cancellation (ANC) Switch ③ Type-C Charging Port ④ Indicator ⑤ Volume +/ Previous Song ⑥ Volume -/ Next Song ⑦ Multi-function button 02
LED Indicator Status Icon Voice Prompts Equipment Status Indicator Light Power on Blue indicator flashing 1s Power on Power off Red indicator flashing 1s and then turn off Power off Playing Blue indicator flashing 1 time / 3s Charging Indicator solid red Fully charged Indicator solid blue Battery low When connected, the red indicator flashing 1 time / 10s Pairing Red and blue indicators flashing alternately Connected Blue indicator flashing 1 time / 3s Specifications Model SR-BH5 Blu
Button Operation ① Active Noise Cancellation (ANC) switch Turn on the ANC mode: Flick down the ANC switch Turn off ANC mode: Swipe up the ANC switch (red dot indicates) Note: Slide the ANC on / off switch to turn on or turn off the ANC mode.
Instructions for Use 1. Pairing ① Long press the multi-function button for 5s, the headphone will automatically start pairing; ② The red and blue lights flash alternately; ③ Select the Bluetooth name "Saramonic BH5" on your device; ④ Once successful, the voice prompts "Your Headset is Connected". After the connection is successful, you can check the battery level on the phone. Bluetooth Note: The headphone will automatically turn off if there's no connection after 5 mins.
3. Charging Use the Type-C cable to charge the headphones. Equipment Status Voice Prompts Indicator Light Battery low Battery low When connected, the red indicator flashes 1 time / 10s Battery low and turn off automatically Power off Red indicators flashes 1s and then turn off Multi-Device Connection (Wireless) 1. Connect the headphone with the first device. 2. Turn off Bluetooth on the first device, the headphone will enter pairing mode automatically again. 3.
After-sales and Supports Warranty Service: 2 years Quality Warranty Life time Technical Service Support According to the relevant laws and regulations of consumer electronic products and the actual the situation of the industry, the following after-sales service regulations are formulated to provide consumers with satisfactory after-sales services: 1. Warranty certificate mainly includes: warranty card and sales certificate. 2.
Safety Instructions Please read the following precautions carefully before using. 1. Please do not put the headphones close to flammable materials to avoid fire accidents when charging. 2. Please keep the plastic bag away from babies and children to avoid suffocation. 3. Please keep the headphones and all accessories away from children and pets, to avoid swallowing as it may cause asphyxia and other dangers. 4.
Q&A Q: The headphone cannot connect to the device? A: Please make sure your headphone is in pairing mode. Delete the pairing record on the Bluetooth device and reconnect the headphone. Q: The headphone cannot be turned on? A: Please check if the headphone has power. Q: Can the battery in the headphone be replaced? A: No. This headphone uses a built-in non-removable lithium polymer battery that cannot be replaced.
感谢您选择Saramonic! 请在使用前仔细阅读本手册,并严格按照说明进行操作和存储。 请妥善保存好说明书以供将来参考。如果用户手册不能帮助您解决某些问题, 请向零售商寻求帮助或给我们发送电子邮件: info@Saramonic.
产品结构 ① 麦克风 ② 主动降噪开关 ③ Type-C充电口 ④ 状态/电量指示灯 ⑤ 音量+/上一曲 ⑥ 音量-/下一曲 ⑦ 多功能键 11
开机 蓝灯亮一秒 Power on 关机 红灯亮一秒后熄灭 Power off 播放中 蓝灯3秒/次 充电中 红灯长亮 充电完成 蓝灯长亮 低电量提醒 已连接状态下,红灯闪烁10秒/次 配对中 红蓝灯交替闪烁 蓝牙已连接 蓝灯闪烁3秒/次 SR-BH5 5.
设备状态 操作说明 开机/关机 长按多功能键5秒 暂停/播放 单击多功能键 开启语音助手 双击多功能键(蓝牙已连接状态下) 重置 长按多功能键8秒(关机状态下) 接听/挂断 双击 拒接 长按1秒(来电状态下) 耳机/手机免提切换 长按1秒(通话状态下) 13
① 长按多功能按键5秒,设备自动进入配对模式; ② 红蓝灯交替闪烁; ③ 在设备上选择蓝牙名称“Saramonic BH5”; ④ 连接成功,语音提示“Your headset is connected”。 Saramonic BH5 注意: 配对模式持续5分钟內,还未 与任何设备进行蓝牙连接,将 自动关机。 Saramonic BH600 Saramonic BH900 2.
使用Type-C充电线给耳机充电。 Battery low Power off 注意:在充电状态下,请关闭主动降噪 开关,否则会延长充电时间。 1. 按配对步骤,将耳机连接到第一台设备; 2. 在第一台设备上断开蓝牙连接,耳机重新进入配对状态; 3. 将耳机与第二台设备配对并连接; 4. 回到第一台设备端,在蓝牙列表选择Saramonic BH5耳机进行连接; 5.
2 年质量保修 根据消费类电子产品的有关法规以及行业的实际情况,为消费者提供满意 的售后服务, 特制定以下售后服务条例 : 1. 保修凭证主要包括 : 保修卡及销售凭证。 2. 售后服务范围 : • 在产品保修期内,凡属于正常使用情况下,由于产品本身质量问题引 起的故障,未经拆修,本公司将负责给予免费维修 ; • 超出保修期产品,需出具保修凭证并支付维修费。如需订配件,需支 付配件费 ; 订购其他的配件则需把维 修的产品寄到我司 ; 经我司专业 维修人员检测后维 修并更换配件 ; • 保修凭证一经涂改,保修即时失效。 • 产品的保修凭证,请消费者妥善保存,遗失不补。 3. 保修期 : • 自开具销售凭证之日起计算, 购买本产品一年内,在正常使用情况下 (非人为损坏或拆修)出现质量问题, 可享受保修服务(包括所有配 件); • 消费者由购买之日起7天内,在正常使 用情况下(非人为损坏)出现质 量问题,未经拆修,可享受包换服务; • 包换服务,仅限于同型号、同颜色的产品。 4.
1.请勿在耳机充电时靠近易燃物品,以免发生火灾事故。 2.请保持耳机的塑料配件远离婴幼儿或孩子,避免意外发生窒息。 3.请让耳机和所有配件远离儿童和宠物,避免吞咽,因为这可能会导致窒息或 其他危险。 4.请不要在需要集中注意力的情况下使用耳机,例如开车,骑自行车等。请遵 守当地法律和驾驶时使用耳机的规定。 5.请避免在儿童或动物的眼睛附近使用设备的指示灯。 6.请勿在高音量下长时间使用耳机,在听电话和音乐时建议使用适当的音量以 免损害您的听力。 7.请不要用水冲洗或浸泡耳机,以免造成损坏。 8.请不要自行拆卸耳机和配件,以避免损坏和保修失效。 9.请勿使耳机受到强烈撞击或震动,以免损坏耳机。 10.请不要使用化学溶剂或清洁剂清洁耳机。 11.
FCC ID: 2ARN3-SR-BH5 18
Scan the QR code and follow us! 扫描微信关注枫笛公众号! Shenzhen Jiayz Photo Industrial., Ltd 深圳市长丰影像器材有限公司 A16 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China 深圳市龙华区观澜街道大富工业区硅谷动力智能终端产业园A16栋 400-613-1096 www.saramonic.com info@saramonic.
SR-BH5 说明书 SR-BH5 说明书 V00 1 :1 157克铜版纸过油 压痕折页 正反面印刷 85×130mm 杨帆/2021.04.