UHF Wireless Microphone System UwMic15 User Manual
Statement Please read this manual carefully before using and strictly operate and store in accordance with the instructions. Please save it for your future reference. If the user manual can not help you to solve certain problems, please ask your retailer for help or email us: info@saramonic. com. Cautions 1. Do not use the unit under water, don't expose it to rain. Please store it in a cool, dry place. 2. Please use and store it in normal temperature.
Contents General Introduction................................................................. 2 Portable Receiver UwMic15-RX15........................................... 2 Introduction................................................................................ 2 Product Structure....................................................................... 2 Attaching Accessories............................................................... 4 LCD Display Operation Guide.......................................
General Introduction The Saramonic UwMic15 UHF wireless microphone system is intended for portable wireless operation and can be used in several environments for applications such as DSLR video, field recording, broadcast TV, electronic news gathering (ENG), on-the-spot interviews, and more. Portable Receiver UwMic15-RX15 Introduction The Saramonic UwMic15-RX15 is a camera-mountable integrated wireless receiver.
④ + or - button Selects functions or values shown on the display. ⑤ POWER indicator Indicates the battery level as follows: Green light: Sufficient battery level. Red light: Low battery level. ⑥ RF indicator and infrared transmitter port The infrared transmitter port sends the set frequency to a transmitter. RF indicator displays the RF input level as follows: Green light: RF signal is strong. Red light: RF signal is weak or disconnected.
Attaching Accessories 1 Connect the supplied cable to the output jack. ① Plug the supplied cable into the OUTPUT jack. ② ① ② For a secure connection, turn to lock the connector. Attach a belt clip. Please Refer to "Attaching Accessories" 2 (page 8). 3 Attach the shoe mount adapter. ① Please attach the belt ② clip upside-down before attaching the shoe mount adapter. ② Push the bottom of the belt clip to make some space between the belt clip and the receiver.
LCD Display Operation Guide ① 1 ② ③ Home screen If no operation is performed for 20 seconds on the other screens, the display will automatically return to the home screen. ① Volume indicator ② Battery level indicator Displays the battery level. Please replace both batteries immediately when the indicator starts flashing. ③ Channel and frequency Indicate the current channel and frequency. 2 Set output volume Set the volume of output audio within the range 0 to 30.
4 Infrared matching function Match the receiver and transmitter via infrared. Details of operation, please refer to "Match the channel of receiver and transmitter" (page 11). 5 Set backlight Set the backgroud LED light to ON or Delay 60 /30 /10 seconds or OFF. Default is "Delay 10s." 6 Restore settings Confirm it then the parameters of RX15 are restored to their factory default settings.
Product Structure ① ② ③ ④ ⑥ ⑧ ⑤ ⑦ ⑨ Antenna ① POWER indicator Indicates the battery level as follows: Solid Green: Sufficient battery level. Solid Red: Battery is getting low. ② AUDIO indicator / IR (infrared detector) AUDIO indicator: Indicates the audio input. IR (infrared detector): Gets the frequency from the receiver. Solid Green: Audio input level is appropriate. Flashing Red: Audio is muted (i.e., disabled). For details on setting the mute function, please refer to "Set Mute key" (page 10).
① Power / Mute button Function Operation Power ON Press button for one second or longer Power OFF Press button until it turns off Mute ON Mute OFF Short press button ② + or – button Selects functions or values shown on the display. ③ SET button Long press the SET button to enter the displayed menu. Then, short press the SET button to confirm your option or long press again to exit without saving. ④ Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries).
2 Connect the mcirophone. For a secure connection, turn to lock the connector. Note: Please turn off the transmitter before attaching or removing the microphone. LCD Display Operation Guide 1 ① ② ③ Home screen If no operatIon is performed for 20 seconds on the other screens, the display will automatically return to the home screen. ① Mute indicator Mute OFF Mute ON ② Battery level indicator Displays the battery level. Please replace both batteries immediately when the indicator starts flashing.
Note: Please DO NOT turn on the phantom power when using with microphones that do not operate on phantom power, mixing boards or any unbalanced devices, because it may cause damage to both transmitter and audio device. Menu display section. Displays various functions. Press the + or - button to switch functions. Set Power key Select Unlocked or Locked. Set "Locked" to lock the power button to prevent the unit being turned off or muted unwittingly while using. Default is "Unlocked.
Restore default setting Version of the UwMic15-SR-XLR15 Serial Number Hand-held Microphone UwMic15-SR-HM15 Introduction The Saramonic SR-HM15 is a handheld wireless UHF microphone transmitter features a compact metallic body, an easy-to-read LCD display, a RF power switch and a PLL synthesizer. The broadcast quality microphone will capture crystal clear and rich sound. It has a built-in antenna, a muting function and power lock function. The channel of SRHM15 is synced up with the receiver via infrared.
② Power / Mute button Power: Long press to turn on/off the SR-HM15. Mute: Short press the button while transmitting, the audio will be muted. Press it again to restore the audio output. Note: In muting, the audio signal is not output but an RF signal is still transmitted. ③ Antenna ④ Battery compartment Operates on two AA batteries (not included). You could use alkaline, lithium or nickel metal hydride batteries. Setup Guide ① Install the batteries. Refer to "UwMic15-SR-HM15" (page 18).
Plug-on Transmitter UwMic15-SR-XLR15 Introduction The Saramonic SR-XLR15 is a compact XLR plug-on type transmitter features a wide switching RF bandwidth, an easy-to-read LCD display, +48V phantom power and mute function. It is suitable for portable wireless operation and can be used in a wide range of applications such as DSLR video, broadcast TV, ENG and more. Product Structure ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① XLR audio input jack Connects to an XLR microphone or audio devices with line output.
④ AUDIO indicator / IR (infrared detector) AUDIO indicator: Indicates the audio input level. IR (infrared detector): Gets the frequency from the receiver. Solid Green: Audio input level is appropriate. Flashing Red: Audio is muted (i.e., disabled). For details on setting the mute function, please refer to "Set Mute key" (page 16). ⑤ LCD screen Displays menus, please refer to "LCD Display Operation Guide" (page 16) for more details. ⑥ Power / Mute button Turns the power or mute function to on or off.
Attaching Accessories Microphone or XLR cable 1 Attach a microphone or XLR cable. Push the microphone or cable connector into the XLR audio input jack of the SR-XLR15 until it clicks into place. Microphone or XLR cable Release button 2 Disconnect a microphone or XLR cable. Press the release button and pull the microphone or XLR cable out carefully in the direction of arrow. Note: Please turn off the transmitter before attaching or removing the microphone.
LCD Display Operation Guide ① ② ③ Home screen If no operatIon is performed for 20 seconds on the other screens, the display will automatically return to the home screen. ① Mute indicator Mute OFF Mute ON ② Battery level indicator Displays the battery level. Please replace both batteries immediately when the indicator starts flashing. ③ Channel group indicator Indicates the channel group. Power key Unlocked Set Power key Select Unlocked or Locked.
Set Backlight Select ON, OFF or Delay 10 / 30 /60 seconds. Default is “Delay 10s.
Operation Guide 1 Install the batteries ① UwMic15-RX15 and UwMic15-TX15. Batteries can be inserted in the plug-on transmitter UwMic15-SR-XLR15 in the same manner. • Long press the Power key to turn the unit off. • Slide the two catches inward and pull out the battery compartment. • Insert two AA size batteries according to the polarity indicators and close the compartment. Please be sure the battery compartment is locked securely. ② UwMic15-SR-HM15 • Long press the power button to turn the power off.
3 Turn on the receiver by long pressing the power button. 4 Match the channel of receiver and transmitter ① Using the auto scan function For the TX15 and SR-XLR15 • Turn on the transmitter by long pressing the power button. • Use the + or – button to display the “Match with TX” menu on receiver. • Use the + or – button to display the "Match with RX" menu on transmitter. • Both long press the SET button to select the menu and short press it to confirm.
• After matching successfully, press the SET button of receiver to return to the previous menu. Note: ① After 20 seconds have elapsed, the display returns to the home screen without saving. ② Some noise may occur when power is turned on, you could turn down the audio input level of devices connected to the receiver accordingly. ② Manually setting the transmitter channel. (Only available on the UwMic15-TX15 and UwMic15-SR-XLR15) • Turn on the transmitter by long pressing the power button.
Specification Transmitter TX15, SR-HM15, SR-XLR15 Channel Number 16 Oscillator type PLL synthesizer Carrier frequencies 555MHz - 579MHz Reference deviation ±5 kHz (–60 dBV, 1 kHz input) Signal to noise ratio 70 dB or more Spur suppression -60dB Voice delay 10 ms Antenna 1/4λ wire antenna TX15: 3.5mm mini jack Audio input connector HM15: None XLR15: XLR-3-11C type (female) Reference audio input level –60 dBV (MIC input, 0 dB attenuation) Distortion 0.5% or less TX15: Approx.
Receiver RX15 Channel number 16 Oscillator type PLL synthesizer Audio output connector 3.5mm mini jack Antenna 1/4λ wire antenna Audio output level –60 dBV Headphone output level 30mW (16 Ω) Receive frequencies 555MHz - 579MHz Receive sensitivity -95dBm Signal to noise ratio 70 dB or more Voice delay 10 ms Reference deviation ±5 kHz(–60 dBV, 1 kHz input) Frequency response 40 Hz to 18 kHz (+/-3dB) Distortion 0.5% or less Spur suppression -60dB Weight Approx.
Packing List TX15 • Body-pack transmitter: TX15 • Omni-directional lavalier microphone • Microphone holder clip • Wind screen • Belt clip SR-XLR15 • Plug-on transmitter: SR-XLR15 23
RX15 • Portable receiver: RX15 • Shoe mount adapter • Belt clip • XLR to 3.5mm locking-type plug audio output cable • 3.
www.saramonic.com The Saramonic logo is trademark which is registered and owned by Saramonic International. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Email: info@saramonic.
UwMic15 说明书 UwMic15 说明书 1F140150053 贺磊 /2016-6-22 1：1 80 克哑粉 28P 骑马钉 尺寸：98×187mm 1PCS
