User Manual

3 Turn on the receiver by long pressing the power button.

4 Match the channel of receiver and transmitter

①

Using the auto scan function

For the TX15 and SR-XLR15

• Turn on the transmitter by long pressing the power button.

• Use the + or – button to display the “Match with TX”

menu on receiver.

• Use the + or – button to display the "Match with RX"

menu on transmitter.

• Both long press the SET button to select the menu and

short press it to confirm.

• Place the infrared transmitter port on the receiver near

the infrared detector on the transmitter.

• If "Sync finished!" displayed on the LCD screen of the

receiver, the frequency for use on the transmitter is set.

• After matching successfully, press the SET button of

receiver to return to the previous menu.

For SR-HM15

• Turn on the transmitter by long pressing the power button.

• Use the + or – button to display the “Match with TX” menu

on receiver.

• Quick press the SET button twice, enter the matching

pattern on the transmitter:

A: Short press to ajust the channel number

B: Quick press the SET button twice again, then exit with

saving.

• Place the infrared transmitter port on the receive near the

infrared detector on the transmitter.

• If "Sync finished!" displayed on the LCD screen, the

frequency for use on the transmitter is set.