Handheld Stereo Audio Recorder SR-Q2 User Manual
Statement Please read this manual carefully before using and strictly operate and store in accordance with the instructions. Please save it for your future reference. If the user manual can not help you to solve certain problems, please ask your retailer for help or email us: info@saramonic.com. Cautions 1. Do not use the unit under water, don't expose it to rain. Please store it in a cool, dry place. 2. Please use and store it in normal temperature.
1. General Introduction The Saramonic SR-Q2 is a handheld audio recorder with a built-in X/Y stereo microphone. The easy-to-read LCD menu display and onebutton-recording interface make SR-Q2 very simple to use. Ideal for using in applications such as audio for video, ENG, filmmaking, field recording, music production, podcasting, etc. The X/Y microphone captures clean stereo sound. The integrated flash recording allows you to record up to 96kHz/16bit.
X/Y stereo microphone The X/Y configuration angled 90° to produce realistic stereo image. PEAK/REC LED indicator The LED indicator will be in solid red while recording; The LED indicator will flash in red while signal overload. LCD screen Displays menu, please refer to "6. LCD Screen" for more details. HOME button Back to previous menu or back to the main menu during recording. 2 REC button Press the REC button to start recording immediately.
HOLD Slide the power button to HOLD to disable all the buttons, preventing inadvertent operation. DC 5V USB port Via the USB port and supplied cable, the SRQ2 can be powered with a USB power bank, USB power supply, computer and more. DC power indicator The LED indicator will turn green while recorder is being powered by the DC 5V. LINE OUT jack A 3.5mm stereo output jack. Output audio to devices like DSLRs, mirrorless cameras, video cameras, etc. Headphone jack A 3.5mm stereo headphone jack.
4 Enter submenu Start/Pause playback Save and play the last file ------- Enter submenu Playback next audio file ------- ------- ------- Playback last audio file ------- ------- Scroll up Scroll down ------- ------- ------- ------- ------- On Main Menu Scroll and Select Scroll and Select Confirm setting • Enter submenu • Scroll right • When it is certain file name, enter delete option • Enter submenu • Playback when it is certain file name ------- • Scroll down • Change parameters only
Exit ------Back to recording standby screen ------- On Popup menu 18 00 : 00 : 00 REC-001. wav 1 001/006 Back to parent menu ------Save the current file and back to main menu Playback Screen Power indicator Microphone gain volume (from 1 to 60) Headphone monitor volume (from 1 to 30) Level meter Elapsed time. This shows the elapsed time (hours: minutes: seconds) of the current file. You can set the maximum elapsed time of every audio file in the "REC SET" Elapsed time / total time of playback.
Note: SR-Q2 will automatically create a maximum of 9 folders. Folder names FOLDER01-FOLDER09. Each folder can accommodate 200 wav files. File names REC001.WAV - REC-200.WAV. For example: The screen shows you are recording: No.001 .wav file. The .wav file will be stored in FOLDER01. 7. Operating Menu Main Menu Sub Menu Sub Menu 1 FILE FOLDER01 REC-001.WAV File Limit 30 minutes 60 minutes 90 minutes 120 minutes Sample Rate 44.1kHz/16bit 44.1kHz/24bit 48kHz/16bit 48kHz/24bit 88.
0 hrs 45 hrs 49 hrs 98 hrs 120 hrs 60 hrs 90 hrs 180 hrs 65 hrs 98 hrs 196 hrs 64GB 128GB 130 hrs 11 hrs 22 hrs 24 hrs 12 hrs 15 hrs 30 hrs 45 hrs 49 hrs 32GB 22 hrs 32 hrs 24 hrs 16GB 16 hrs 5 hrs 6 hrs 96kHz/ 16bit 88.2kHz/ 16bit 48kHz/ 24bit 7 hrs 11 hrs 8 hrs 12 hrs 8GB (2) REC SET: Set recording parameter. File Limit: Set maximum elapsed time limit. For Example: If you set file limit up to 30 minutes, a 90 minutes’ recording will be divided into 3 separate .wav files.
(4) PLAY MODE Play 1 File: Play one selected .wav file for one time. Repeat 1 File: Play one selected .wav file repeatedly. Play Folder: Play .wav files in order of file name of present folder. Repeat Folder: Play all .wav files of present folder in repeatedly. (5) SYSTEM SET Date & Time: Set the date and time so that all files will include a time-stamp when exported. LCD Backlight: Set background LCD light. Select LCD backlight on, off or delay 5/10/15/30 seconds. Default setting is 30 seconds.
9.
www.saramonic.com The Saramonic logo is trademark which is registered and owned by Saramonic International. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Email: info@saramonic.