User Manual

Operation Guide

1 Install the batteries

①



UwMic15-RX15 and UwMic15-TX15. Batteries can be

inserted in the plug-on transmitter UwMic15-SR-XLR15 in the

same manner.

• Long press the Power key to

turn the unit off.

• Slide the two catches inward

and pull out the battery

compartment.

• Insert two AA size batteries

according to the polarity

indicators and close the

compartment. Please be sure the

battery compartment is locked

securely.

②



UwMic

-SR-HM

• Long press the power button to turn the power off.

• Slide the battery compartment cover in the direction of the

arrow, and completely pull it out.

• Insert two new AA batteries into the battery compartment

with

and polarities in the correct orientation.

• Close the battery cover, after inserting battery.

Note:

①

Please remove the batteries from the battery compartment

when the device is not used for a long time.

②

Please always use sets of the same type of battery.

③

Replacing the batteries during operation may generate

noise. Please make sure that the unit is turned off before

replacing batteries.

Connect the receiver to the mic jack of a camera, camcorder

or mixer with the supplied cable.