User Manual

②



Power / Mute button

Power: Long press to turn on/off the SR-HM15.

Mute: Short press the button while transmitting, the audio

will be muted. Press it again to restore the audio output.

Note: In muting, the audio signal is not output but an RF

signal is still transmitted.

③



Antenna

④



Battery compartment

Operates on two AA batteries (not included).

You could use alkaline, lithium or nickel metal hydride

batteries.

Setup Guide

①

Install the batteries. Refer to "UwMic15-SR-HM15" (page 18).

②

(Option) Set the lock switch to ON or OFF.

③

(Option) Set the RF power to HIGH or LOW. The transmit

power level varies depending on the model.

④

Press the power button to turn on the UwMic15-RX15.

⑤

Turn on the receiver UwMic15-RX15 and sync with the

transmitter UwMic15-SR-HM15. Details of operation,

please refer to "For UwMic15-SR-HM15" (page 19).

⑥

When sync successfully, the screen of UwMic15-SR-HM15

will show the group and channel same as the receiver.

⑦

Close the grip in the direction of the arrows.

⑧

Now it is ready to use.