User Manual
19
3 Turn on the receiver by long pressing the power button.
4 Match the channel of receiver and transmitter
①
Using the auto scan function
For the TX15 and SR-XLR15
• Turn on the transmitter by long pressing the power button.
• Use the + or – button to display the “Match with TX”
menu on receiver.
• Use the + or – button to display the "Match with RX"
menu on transmitter.
• Both long press the SET button to select the menu and
short press it to confirm.
• Place the infrared transmitter port on the receiver near
the infrared detector on the transmitter.
• If "Sync finished!" displayed on the LCD screen of the
receiver, the frequency for use on the transmitter is set.
• After matching successfully, press the SET button of
receiver to return to the previous menu.
For SR-HM15
• Turn on the transmitter by long pressing the power button.
• Use the + or – button to display the “Match with TX” menu
on receiver.
• Quick press the SET button twice, enter the matching
pattern on the transmitter:
A: Short press to ajust the channel number
B: Quick press the SET button twice again, then exit with
saving.
• Place the infrared transmitter port on the receive near the
infrared detector on the transmitter.
• If "Sync finished!" displayed on the LCD screen, the
frequency for use on the transmitter is set.