User manual

35
A. Indicates the current least noise channel is CH 03 and ask
you if you would like to use it. You can short press the SET
button to confirm the channel within 20 seconds or long
press the SET button to exit the displayed menu without
saving.
B. Counting down 20 second
Note:
①
After 20 seconds have elapsed, the display
returns to the home screen without saving.
②
Some noise may occur when power is
turned on, you could turn down the audio
input level of devices connected to the
receiver accordingly.
②
Manually setting the receiver channel.
• Use the + or – button to display the channel menu on the
receiver.
• Long press the SET button to select the menu.
• Use the + or – button to select the desired channel and
confirm it by short pressing the SET button.
5. Match the channel of receiver and transmitter.
①
Using infrared transmission to transfer the frequency set
on the receiver to a transmitter.
For the TX9 and TX-XLR9
• Turn on the transmitter and receiver.
• Use the + or – button to display the “Match with TX” menu
on receiver.