User manual

36
• Use the + or – button to display the "Match with RX" menu
on transmitter.
• Both long press the SET button to select the menu and
short press it to confirm.
• Place the infrared transmitter port on the receiver near the
infrared detector on the transmitter.
• If "Sync finished!" displayed on the LCD screen, the
frequency for use on the transmitter is set.
• After matching successfully, press the SET button of
receiver to return to the previous menu.
For HU9
• Turn the transmitter power on.
• Use the + or – button to display the "Match with TX" menu
on receiver.
• Place the infrared transmitter port on the receiver near the
infrared detector on the transmitter.
• If sync successfully, the group and channel of HU9 are the
same as the receiver's.
• After matching successfully, press the SET button of
receiver to return to the previous menu.
Note: When using the infrared link, please place the receiver
and transmitter within about 20cm of each other within
20 seconds. After 20 seconds have elapsed, the infrared
transmission finishes and the display returns to the previous
menu.
②
Manually setting the transmitter channel (Only available
on the UwMic9-TX9 and the UwMic9-TX-XLR9).