User manual

37
• Turn on the transmitter by long pressing the power button.
• Use the + or – button to display the channel setting menu
on the transmitter.
• Long press the SET button to select the menu.
• Use the + or – button to select the same channel as the
receiver and confirm it by short pressing the SET button.
6. Attach the accessories you need for the receiver and
transmitter. Refer to "Attaching Accessories" (page 4, page
10, page 17 and page 23).
7. You are ready to record.
Specification
Receiver RX9 and RX-XLR9
Channel number 96
Channel group A and B
Oscillator type PLL synthesizer
Audio output connector
RX9: 3.5 mm mini jack
RX-XLR9: XLR-3-11C type (male)
Antenna 1/4
λ
wire antenna
Audio output level –60 dBV
Headphone output level 30mW (16 Ω)
Receive frequencies 514 MHz - 596 MHz
Receive sensitivity -95 dBm
Signal to noise ratio 70 dB or more
Voice delay 12 ms
Reference deviation ±5 kHz (–60 dBV, 1 kHz input)
Frequency response 40 Hz to 18 kHz (+/-3dB)
Distortion 0.5% or less
Spur suppression -60 dB
Reference audio input level –60 dBV (MIC input, 0 dB attenuation)
Weight (excluding batteries)
RX9: Approx. 218.7g
RX-XLR9: Approx. 96g
Battery Two AA size batteries
DC input connector Type-C jack (RX-XLR9 only)