User manual

25
Default is Group A in Channel 01 (514.56MHz) and Group B
in Channel 01 (556.51MHz).
Set output volume. Set the volume of output audio within
the range 0 to 30. The setting is retained even after the
power is turned off. Default is 27.
Auto scan function. Automatically scan an available and clear
channel. Details of operation, please refer to "Using the auto
scan function" (page 34).
Infrared matching function. Match the receiver and
transmitter via infrared. Details of operation, please refer to
"Match the channel of receiver and transmitter" (page 35).
Set backlight. Set the backgroud LED light to ON or Delay
60 /30 /10 seconds or OFF. Default is "Delay 10s."
Restore default setting.