User Manual

/ 22

Operation Guide

Install the batteries.

①

UwMic9-RX9 and UwMic9-TX9. Batteries can be inserted in the

plug-on transmitter UwMic9-TX-XLR9 in the same manner.

②

UwMic9-HU9

• Long press the Power key to

turn the unit off.

• Slide the two catches inward

and pull out the battery

compartment.

• Insert two AA size batteries

according to the polarity

indicators and close the

compartment. Please be sure

the battery compartment is

locked securely.

• Long press the power button

to turn the power off.

• Turn the grip in the direction

of the arrow, and pull the

grip down until the battery

compartment is visible.

• Insert two new AA

batteries into the battery

compartment with

and

polarities in the correct

orientation.

Note:

①

Please remove the batteries from the battery compartment

when the device is not used for a long time.

②

Please always use sets of the same type of battery.

③

Replacing the batteries during operation may generate

noise. Please make sure that the unit is turned off before

replacing batteries.