User Manual

/ 23
• Use the + or – button to
display the auto scan screen
on the receiver.
• Long press the SET button to
select “Auto scan?”
• Press the SET button to
confirm.
• The channel with the least
noise and interference will be
displayed.
A. Indicates the current least noise channel is CH 03 and ask
you if you would like to use it. You can short press the SET
button to confirm the channel in 20 seconds or long press
the SET button to exit the displayed menu without saving.
B. Counting down 20 second
Note:
①
After 20 seconds have elapsed, the display returns to the
home screen without saving.
②
Some noise may occur when power is turned on,
you could turn down the audio input level of devices
connected to the receiver accordingly.
A B
2
Connect the receiver to the mic jack of a camera,
camcorder or mixer with the supplied cable.
3
Turn on the receiver by long pressing the power button.
4
Set the channel of the receiver by two ways:
①
Using the auto scan function