User Manual

/ 15
④

Operation panel
ON
OFF
HIGH
LOW
LOCK
UHF
RF
B
A
C
A. Infrared detector. Receives
the frequency set on the
receiver.
B. Lock switch. Set to ON will
lock the power button. It will
prevent the power being
turned off inadvertently
during transmission.
Note: The lock switch will
not lock the mute function.
C. RF power. Set the transmit
output level to HIGH or LOW.
⑤

Battery compartment
Operates on two AA batteries (not included).
You could use alkaline, lithium or nickel metal hydride batteries.
Setup Guide
1
Install the batteries. Refer to "UwMic9-HU9" (page 22).
2
(Option) Set the lock switch to ON or OFF.
3
(Option) Set the RF power to HIGH or LOW. The transmit
power level varies depending on the model.
4
Press the power button to turn on the HU9.
5
Turn on the receiver UwMic9-RX9 and sync with the
transmitter HU9. Details of operation, please refer to "For
HU9" (page 25).
6
When sync successfully, the screen of HU9 will show the
group and channel same as the receiver.
7
Close the grip in the direction of the arrows.
8
Now it is ready to use.