User Manual

/ 20

Select Channel. Long press the SET button to enter the menu.

Use the "+" and "-" to select the channel you need and shot press

the SET button to confirm.

Select Group. You can choose "A" or "B" channel group. Each

group has 96 channels. Default is "Group A."

Set the microphone drive power supply (+48V). When set to ON,

48V phantom power is supplied to the connected microphone

and the "+48V" indicator lights up. Default is "+48V OFF."

Note: Please DO NOT turn on the phantom power when using

with microphones that do not operate on phantom power,

mixing boards or any unbalanced devices, because it may

cause damage to both transmitter and audio device.

Select RF power level. You can set the transmitted RF power to

High, Middle or Low. Default is "High."