User Manual

/ 25
• Both long press the SET button to select the menu and short
press it to confirm.
• Place the infrared transmitter port on the receiver near the
infrared detector on the transmitter.
• If "Sync finished!" displayed on the LCD screen, the frequency
for use on the transmitter is set.
• After matching successfully, press the SET button of receiver
to return to the previous menu.
For HU9
• Turn the transmitter power on.
• Use the + or – button to display the "Match with TX" menu on
receiver.
• Place the infrared transmitter port on the receiver near the
infrared detector on the transmitter.
• If sync successfully, the group and channel of HU9 are the
same as the receiver's.
• After matching successfully, press the SET button of receiver
to return to the previous menu.
Note: When using the infrared link, please place the receiver and
transmitter within about 20cm of each other within 20 seconds.
After 20 seconds have elapsed, the infrared transmission
finishes and the display returns to the previous menu.