UHF Wireless Microphone System UwMic9 User Manual
Statement Please read this manual carefully before using and strictly operate and store in accordance with the instructions. Please save it for your future reference. If the user manual can not help you to solve certain problems, please ask your retailer for help or email us: info@saramonic. com. Cautions 1. Do not use the unit under water, don't expose it to rain. Please store it in a cool, dry place. 2. Please use and store it in normal temperature.
CONTENTS General Introduction ...................................................................... 2 Portable Receiver UwMic9-RX9 ...................................................... 2 Introduction ...................................................................................2 Product Structure ...........................................................................2 Attaching Accessories .....................................................................4 LCD Display Operation Guide .........
General Introduction The Saramonic UwMic9 UHF wireless microphone system is intended for portable wireless operation and can be used in several environments for applications such as DSLR video, field recording, broadcast TV, electronic news gathering (ENG), onthe-spot interviews, and more. Portable Receiver UwMic9-RX9 Introduction The Saramonic UwMic9-RX9 is a camera-mountable integrated wireless receiver.
① Antennas ② Power button Press to turn on or off the RX9. ③ SET button Long press the SET button to enter the displayed menu. Then, short press the SET button to confirm your option or long press again to exit without saving. ④ POWER indicator Indicates the battery level as follows: Green light: Sufficient battery level. Red light: Low battery level. ⑤ RF indicator and infrared transmitter port The infrared transmitter port sends the set frequency to a transmitter.
⑩ OUTPUT jack Connect the RX9 to a video camera, camcorder, mixer or amplifier with the supplied output cable. ⑪ Standard cold shoe Attaching Accessories 1 Connect the supplied cable to the output jack. ① Plug the supplied cable into the OUTPUT jack. ② For a secure connection, turn to lock the connector. 2 Attach a belt clip. Please Refer to "Attaching Accessories" (page 10). 3 Attach the shoe mount adapter.
① Please attach the belt clip upside-down before attaching the shoe mount adapter. ② Push the bottom of the belt clip to make some space between the belt clip and the receiver. ③ Align the belt clip with the two vertical grooves on the shoe mount adapter and insert the adapter in the direction of the arrow. ④ Push the shoe mount adapter in fully until the belt clip fits into the horizontal groove on the adapter holds. LCD Display Operation Guide Home screen.
③ Battery level indicator Displays the battery level. Please replace both batteries immediately when the indicator starts flashing. ④ Name of the channel group ⑤ Current channel Displays the current channel number. ⑥ Audio input level meter Displays the audio input level. 2 Power key. Long press the SET button to unlocked or locked the power key. Lock the power key to prevent the receiver being turned off unwittingly while using.
Power of the Group. When you only use one group signal, please turn off the other group to save battery. To save battery, system default of the Group B is power off while the Group A is power on. When operating two transmitters simultaneously, please set each transmitter to a different group to prevent interference or noise. Select channel. Details of operation, please refer to "Manually setting the receiver channel" (page 24). Set output volume. Set the volume of output audio within the range 0 to 30.
Set backlight. Set the backgroud LED light to ON or Delay 60 /30 /10 seconds or OFF. Default is "Delay 10s." Restore settings. Confirm it then the parameters of RX9 are restored to their factory default settings. Body-pack Transmitter UwMic9-TX9 Introduction This transmitter is a compact transmitter that employs a crystalcontrolled PLL synthesizer. It is equipped with a muting function and a locking-type microphone input connector. The RF power output can be switched among high, middle and low.
Product Structure ① Antenna ② AUDIO indicator / IR (infrared detector) AUDIO indicator: Indicates the audio input level. IR (infrared detector): Receives the frequency from the receiver. Solid Green: Audio input level is appropriate. Flashing Red: Audio is muted (i.e., disabled). For details on setting the mute function, please refer to "Set Mute key" (page 12). ③ POWER indicator Indicates the battery level as follows: Solid Green: Sufficient battery level. Solid Red: Low battery.
⑥ Battery compartment Accepts two AA batteries (alkaline, nickel metal hydride, or lithium batteries). ⑦ Power / Mute button Function Operation Power ON Press button for one second or longer Power OFF Press button until it turns off Mute ON Mute OFF Short press button ⑧ SET button Long press the SET button to enter the displayed menu. Then, short press the SET button to confirm your option or long press again to exit without saving.
Attaching Accessories 1 Attach a belt clip. Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side. 2 Connect the mcirophone. For a secure connection, turn to Note: Please turn off the transmitter before attaching or removing the microphone. lock the connector.
LCD Display Operation Guide Home screen. If no operatIon is performed for 20 seconds on the other screens, the display will automatically return to the home screen. ① RF transmission power indicator Indicates the current transmission power level. For details on setting the level, please see "Select RF power level" (page 12). ② Channel group indicator Indicates the channel group. ③ Mute indicator Mute OFF Mute ON ④ Battery level indicator Displays the battery level.
2 ① ① Menu display section. Displays various functions. Press the + or - button to switch functions. Set Power key. Select Unlocked or Locked. Set "Locked" to lock the power button to prevent the unit being turned off or muted unwittingly while using. Default is "Unlocked." Select Channel. Long press the SET button to enter the menu. Use the "+" and "-" to select the channel you need and shot press the SET button to confirm. Select Group. You can choose "A" or "B" channel group.
Set Mute key. If you want to mute the audio, please select "Enable" first and then short press the power button. Default is "Enable." 7 IR Match. Set to match with the receiver. The screen will display "Matching" when in process. After successful matching, it will indicate "Sync finished." 8 Set Backlight. Select ON, OFF or Delay 10 / 30 /60 seconds. Default is "Delay 10s.
9 10 11 Hand-held Microphone UwMic9-HU9 Introduction Saramonic HU9 is a handheld wireless UHF microphone transmitter features a compact metallic body, an easy-to-read LCD display, a RF power switch and a PLL synthesizer. The broadcast quality microphone will capture crystal clear and rich sound. It has a builtin antenna, a muting function and power lock function. The channel of HU9 is synced up with the receiver via infrared.
Product Structure ① LCD screen A. Channel Groups. Two channel groups: A and B. Each group has 96 channels. B. Channel number. C. Battery level indicator. D. MUTE. Audio is muted. This LCD display indicates it is ⑤ operating on channel 96 of group A. ② Power / Mute button Power: Long press to turn on/off the HU9. Mute: Short press the button while transmitting, the audio will be muted. Press it again to restore the audio output.
④ Operation panel A. Infrared detector. Receives the frequency set on the receiver. B. Lock switch. Set to ON will A lock the power button. It will prevent the power being B turned off inadvertently during transmission. C C. RF power. Set the transmit output Note: The lock switch will not lock the mute function. level to HIGH or LOW. ⑤ Battery compartment Operates on two AA batteries (not included). You could use alkaline, lithium or nickel metal hydride batteries. Setup Guide 1 Install the batteries.
Plug-on Transmitter UwMic9-TX-XLR9 Introduction The Saramonic TX-XLR9 is a compact XLR plug-on type transmitter features a wide switching RF bandwidth, an easyto-read LCD display, +48V phantom power and mute function. It is suitable for portable wireless operation and can be used in a wide range of applications such as DSLR video, broadcast TV, ENG and more. Product Structure ① XLR audio input jack Connects to an XLR microphone or audio devices with line output.
④ AUDIO indicator / IR (infrared detector) AUDIO indicator: Indicates the audio input level. IR (infrared detector): Gets the frequency from the receiver. Solid Green: Audio input level is appropriate. Flashing Red: Audio is muted (i.e., disabled). For details on setting the mute function, please refer to "Set Mute key" (page 20). ⑤ LCD screen Displays menus, please refer to "LCD Display Operation Guide" (page 19) for more details. ⑥ Power / Mute button Turns the power or mute function to on or off.
Attaching Accessories 1 Attach a microphone or XLR cable. Push the microphone or cable connector into the XLR audio input jack of the TX-XLR9 until it clicks into place. 2 Disconnect a microphone or XLR cable. Press the release button and pull the microphone or XLR cable out carefully in the direction of arrow. Note: Please turn off the transmitter before attaching or removing the microphone.
LCD Display Operation Guide Home screen. If no operatIon is performed for 20 seconds on the other screens, the display will automatically return to the home screen. ① RF transmission power indicator Indicates the current transmission power level. For details on setting the level, please see "Select RF power level" (page 20). ② Channel group indicator Indicates the channel group. ③ Mute indicator Mute OFF Mute ON ④ Battery level indicator Displays the battery level.
2① ① Menu display section. Displays various functions. Press the + or - button to switch functions. Set Power key. Select Unlocked or Locked. Set "Locked" to lock the power button to prevent the unit being turned off or muted unwittingly while using. Default is "Unlocked." Select Channel. Long press the SET button to enter the menu. Use the "+" and "-" to select the channel you need and shot press the SET button to confirm. Select Group. You can choose "A" or "B" channel group.
mixing boards or any unbalanced devices, because it may cause damage to both transmitter and audio device. Select RF power level. You can set the transmitted RF power to High, Middle or Low. Default is "High." Set Mute key. If you want to mute the audio, please select "Enable" first and then short press the power button. Default is "Enable." 8 IR Match. Set to match with the receiver. The screen will display "Matching" when in process. After successful matching, it will indicate "Sync finished.
11 12 Operation Guide 1 Install the batteries. ① UwMic9-RX9 and UwMic9-TX9. Batteries can be inserted in the plug-on transmitter UwMic9-TX-XLR9 in the same 9 manner. • L ong press the Power key to turn the unit off. • S lide the two catches inward and pull out the battery compartment.
indicators and close the compartment. Please be sure the battery compartment is locked securely. Long press the power button to turn the power off. T urn the grip in the direction of the arrow, and pull the grip down until the battery compartment is visible. I nsert two new AA batteries into the battery compartment with and polarities in the correct orientation. Note: ① Please remove the batteries from the battery compartment when the device is not used for a long time.
• Use the + or – button to display the auto scan screen on the receiver. • Long press the SET button to select “Auto scan?” • Press the SET button to confirm. • The channel with the least noise and interference will be displayed. A. Indicates the current least noise channel is CH 03 and ask you if you would like to use it. You can short press the SET button to confirm the channel in 20 seconds or long press the SET button to exit the displayed menu without saving. B.
• Long press the SET button to select the menu. • U se the + or – button to select the desired channel and confirm it by short pressing the SET button. 5 Match the channel of receiver and transmitter. ① Using infrared transmission to transfer the frequency set on the receiver to a transmitter. For the TX9 and TX-XLR9 • Turn on the transmitter by long pressing the power button. • U se the + or – button to display the “Match with TX” menu on receiver.
• If "Sync finished!" displayed on the LCD screen, the frequency for use on the transmitter is set. • A fter matching successfully, press the SET button of receiver to return to the previous menu. For HU9 • Turn the transmitter power on. • U se the + or – button to display the "Match with TX" menu on receiver. • P lace the infrared transmitter port on the receiver near the infrared detector on the transmitter. • I f sync successfully, the group and channel of HU9 are the same as the receiver's.
• Use the + or – button to select the same channel as the receiver and confirm it by short pressing the SET button. 6 Attach the accessories you need for the receiver and transmitter. Refer to "Attaching Accessories" (page 4, page10 and page18). 7 You are ready to record. Specification Receiver RX9 Channel number 96 Channel group A and B Oscillator type PLL synthesizer Audio output connector 3.
Reference deviation ±5 kHz (–60 dBV, 1 kHz input) Signal to noise ratio 70 dB or more Spur suppression -60 dB Voice delay 12 ms Antenna 1/4λ wire antenna TX9: 3.5mm mini jack Audio input connector HU9: none TX-XLR9: XLR-3-11C type (female) Reference audio input level –60 dBV (MIC input, 0 dB attenuation) Distortion 0.5% or less TX9: Approx. 211.4g (excluding batteries) Weight HU9: Approx. 338.2g (excluding batteries) TX-XLR9: Approx.
Packing list / 31
User manual / 32