User Manual

/ 23
mixing boards or any unbalanced devices, because it may cause
damage to both transmitter and audio device.
Select RF power level. You can set the transmitted RF power to
High, Middle or Low. Default is "High."
Set Mute key. If you want to mute the audio, please select
"Enable" first and then short press the power button. Default is
"Enable."
8
IR Match. Set to match with the receiver. The screen will display
"Matching" when in process. After successful matching, it will
indicate "Sync finished."
9
Set Backlight. Select ON, OFF or Delay 10 / 30 /60 seconds.
Default is "Delay 10s."