User Manual

/ 26
• Use the + or – button to
display the auto scan screen on
the receiver.
• Long press the SET
button to select “Auto scan?”
• Press the SET button to
confirm.
• The channel with the
least noise and interference will
be displayed.
A. Indicates the current least noise channel is CH 03 and ask you if
you would like to use it. You can short press the SET button to
confirm the channel in 20 seconds or long press the SET button
to exit the displayed menu without saving.
B. Counting down 20 second
Note:
① After 20 seconds have elapsed, the display returns
to the home screen without saving.
② Some noise may occur when power is turned on,
you could turn down the audio input level of devices
connected to the receiver accordingly.
② Manually setting the receiver channel.
• U se the + or – button to display the channel menu on the
receiver.