User Manual

/ 28
• If "Sync finished!" displayed on the LCD screen, the frequency
for use on the transmitter is set.
• A fter matching successfully, press the SET button of receiver to
return to the previous menu.
For HU9
• Turn the transmitter power on.
• U se the + or – button to display the "Match with TX" menu on
receiver.
• P lace the infrared transmitter port on the receiver near the
infrared detector on the transmitter.
• I f sync successfully, the group and channel of HU9 are the same
as the receiver's.
• A fter matching successfully, press the SET button of receiver to
return to the previous menu.
Note: When using the infrared link, please place the receiver and
transmitter within about 20cm of each other within 20 seconds.
After 20 seconds have elapsed, the infrared transmission finishes
and the display returns to the previous menu.
② Manually setting the transmitter channel (Only available on
the UwMic9-TX9 and the UwMic9-TX-XLR9
• Turn on the transmitter by long pressing the power button.
• Use the + or – button to display the channel setting menu on the
transmitter.
• Long press the SET button to select the menu.