User Manual

/ 29
• Use the + or – button to select the same channel as the receiver
and confirm it by short pressing the SET button. 6 Attach the
accessories you need for the receiver and transmitter. Refer to
"Attaching Accessories" (page 4, page10 and page18).
7 You are ready to record.
Specification
Receiver RX9
Channel number
96
Channel group
A and B
Oscillator type
PLL synthesizer
Audio output connector
3.5 mm mini jack
Antenna
1/4λ wire antenna
Audio output level
–60 dBV
Headphone output level
30mW (16 Ω)
Receive frequencies
514.56 MHz-595.46 MHz
Receive sensitivity
-95 dBm
Signal to noise ratio
70 dB or more
Voice delay
12 ms
Reference deviation
±5 kHz (–60 dBV, 1 kHz input)
Frequency response
40 Hz to 18 kHz (+/-3dB)
Distortion
0.5% or less
Spur suppression
-60 dB
Weight
Approx. 218.7g (excluding batteries)
Battery
Two AA size batteries
Dimensions
170.9 × 63.5 × 30.0 mm
Operating temperature
0 °C to 50 °C
Storage temperature
–20 °C to +55°C
Transmitter TX9, HU9 and TX-XLR9
Channel number
96
Channel group
A or B
Oscillator type
PLL synthesizer
Carrier frequencies
514.56 MHz-595.46 MHz