User Manual

/ 7
Power of the Group. When you only use one group signal, please
turn off the other group to save battery. To save battery, system
default of the Group B is power off while the Group A is power on.
When operating two transmitters simultaneously, please set each
transmitter to a different group to prevent interference or noise.
Select channel. Details of operation, please refer to "Manually
setting the receiver channel" (page 24).
Set output volume. Set the volume of output audio within the
range 0 to 30. The setting is retained even after the power is turned
off. Default is 30.
Auto scan function. Automatically scan an available and clear
channel. Details of operation, please refer to "Using the auto scan
function" (page 23).
Infrared matching function. Match the receiver and transmitter via
infrared. Details of operation, please refer to "Match the channel of
receiver and transmitter" (page 24).