5.
Statement Please read this manual carefully before using and strictly operate and store in accordance with the instructions. Please save it for your future reference. If the user manual can not help you to solve certain problems, please ask your retailer for help or email us: info@saramonic. com. Cautions 1. Do not use the unit under water, don't expose it to rain. Please store it in a cool, dry place. 2. Please use and store it in normal temperature.
Contents General Introduction 2 Highlights 2 Portable Receiver VmicLink5-RX 2 Product Structure 2 Attaching Accessories 3 LCD Display Operation Guide 3 Body-pack Transmitter VmicLink5-TX 5 Product Structure 5 Attaching Accessories 6 LCD Display Operation Guide 6 Battery Charger 8 Specifications 8 Packing List 9 Package 9 1
1 General Introduction 3.1 Product Structure The Saramonic VmicLink5 wireless microphone system utilizes the new 5.8GHz transmission technology to transfer high quality audio. One receiver can work with up to three transmitters simultaneously, which is very useful and flexible for a udio recording in DSLR video, field recording, filmmaking, broadcast & TV, electric news gathering (ENG), on-the-spot interviews, sound design and more. 2 Highlights • The 5.8GHz provides high quality audio.
cover according to the indicating arrow to open the battery compartment. Install a battery properly and the battery will be locked automatically. Slide the switch to close the battery compartment. Remove a battery: Slide the switch on the battery compartment cover according to the indicating arrow to open the battery compartment. Slide the battery locking unit to release the battery. ⑦ PHONE jack 3.5mm stereo mini headphone jack. Connect a headphone to monitor the audio output.
"A"or"B"or"C" solid: The RX has been matched with the TX successfully in this group. NOTE: Details please refer to "Match with TX" & "Match with RX" (page 4/7). ② Volume indicator Indicates the volume of audio output. ③ Mute indicator MUTE ON When the output mode is mono, the audio from left and right channel will be mixed. When it is stereo, the left and right audio channel output will be separated.
NOTE: Please match the TX and RX if they haven't been matched before. Once RX and TX have been matched successfully, the setting is retained even after the power is turned off. The RX and TX will automatically match with each other everytime after powered on. 4 Body-pack Transmitter VmicLink5-TX The VmicLink5-TX is a compact transmitter that employs a crystal-controlled PLL synthesizer. It is equipped with a muting function and lock-type Mic and Line input connectors. 4.
Select functions or values shown on the display. ⑤ LCD display Display menus, please refer to "1.4.3 LCD Display Operation Guide" for more details. ⑥ Battery compartment Install and remove the battery instructions are the same as receiver. ⑦ Mic input jack Connect to the supplied lavalier microphone. ⑧ Line input jack Connect to audio devices with line output. ⑨ Belt clip 4.2 Attaching Accessories • Connect the microphone / audio device. • For a secure connection, turn to lock the connector.
③ Volume indicator Indicates the volume of audio output. ④ Mute indicator MUTE ON MUTE OFF Note: If turn on Mute of the TX, only this TX will be muted. ⑤ Battery level indicator Displays the battery level. Please replace the battery immediately when the indicator starts flashing. Mute key enable / disable Long press the SET button to enable / disable Mute function. • Enable: Press power button to turn Mute On / Off. • Disable: The audio will not be muted during using. • Default is "enable.
Restore default setting Restore all settings of the TX to default settings. NOTE: The matching setting will also be cleared after restoring. Version of the TX Audio frequence response 40Hz-18KHz/±1dB Voice delay 18ms Power consumption RX: 180mA/6V TX: 140mA/6V Antenna gain 3dBi Weight 810g Battery 7.
7 Packing List 8 Package VmicLink5 RX+TX This package includes one receiver RX and one transmitter TX. VmicLink5 RX+TX+TX This package includes one receiver RX and two transmitters TX. VmicLink5 RX+TX+TX This package includes one receiver RX and three transmitters TX. RX • Portable receiver: VmicLink5-RX • Shoe mount adapter • Belt clip • Antenna • Rechargeable Li-ion battery • XLR to 3.5mm locking-type plug audio output cable • 3.
www.saramonic.com The Saramonic logo is trademark which is registered and owned by Saramonic International. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN ) Email: info@saramonic.